MB IR NEC KEY PROGRAMER | PROBLEM |

[Junkyard Dog]

Hi, i dont know where post this but i think here i am good.
Here is my problem when i install usb driver and run software i have "hardware error" can somebody help me?
I am using fresh and clear windows xp 32-bit

[narkeleptk]

This thing is notorious for this problem. Its driver problem on your pc. Easiest thing is to install it in a blank winxp vm by itself.
This tool is hardly worth the effort tho. Never once would the remotes function work after renew when I played around with it.

[tothzsolt]

hi freind wiew.......

https://www.digital-kaos.co.uk/forums/showthread.php/232236-mb-ir-key-programmer-error-API-HOOK

[narkeleptk]

No api hook issue for this one, you can see the program running in his photo's. Their issue is only system not finding the hardware which is only driver problem.

[Junkyard Dog]

This thing is notorious for this problem. Its driver problem on your pc. Easiest thing is to install it in a blank winxp vm by itself.
This tool is hardly worth the effort tho. Never once would the remotes function work after renew when I played around with it.

Ok i test like this and give report here.

[narkeleptk]

Another thing to keep in mind, Sometimes when software loads the first attempt will say not found but you can select between com 1 and back to com 3 a few times and will finally connect and say hardware found

[Junkyard Dog]

Another thing to keep in mind, Sometimes when software loads the first attempt will say not found but you can select between com 1 and back to com 3 a few times and will finally connect and say hardware found

Tested but not working... :(

[Junkyard Dog]

Or is possible read/write this NEC by UPA-USB? or only like cgdi etc..?

[Junkyard Dog]

somebody?.......

[carmoh]

hi man

only cgdi;vvdi mb;ak500

CAN DO

[Junkyard Dog]

i need it for W639, is impossible with this NEC programmer?

[carmoh]

sorry this is not a good programmer for mercedes keys
even if you manage to launch it it is full of error
I tested it in 2012

[Junkyard Dog]

do you have ak500 ? because about this i read is full of error too...

[carmoh]

HI

I HAVE AK500 PROG2 AND VVDI MBTOOL TOO

[Junkyard Dog]

and what about iprog ? somebody try program with this ?

[narkeleptk]

do you have ak500 ? because about this i read is full of error too...

ak500 was ok for up to about 06 if using new keys but its old tool now. It has its problems including the same your having with the nec programmer currently since its uses the same program for writing keys.

[carmoh]

hi

iprog can't do it just read statut of key

[Junkyard Dog]

hi

iprog can't do it just read statut of key

https://youtu.be/IHWHtmzdXgI i found this...





And what about this? http://www.fvdiobd.com/mb-ir-plus-key-programmer-for-mercedes-benz.html

[jolidj]

first you need to read mcu on your ezs . after generate key and after program nec . you need new pc for properly work your mb nec tool.

[Junkyard Dog]

first you need to read mcu on your ezs . after generate key and after program nec . you need new pc for properly work your mb nec tool.

i do everything..read ezs/generate keys...only problem is only with NEC programmer as you can see on first post :)