Jaguar X Type 1L05H Read

[McDowell]

Hello mates,

I´ve tried to read the dash with UPA, SMOK and VVDI as 912dg128 and no luck.

Do you know the way to read the information on this one¿

704716704713704714704715704717

The problem I am having is many CAN failure with many fault codes.

I though it was coming from dash bad soldering but still not working well. any ideas on this?

Thanks so much in advance.

[karalada]

Try this connection

[McDowell]

Try this connection

Hello karalada, I have tried that one as 912DT128 and 9S12DG128 and nothing....

The main problem is car not turning on sometimes and when this happens I get many fault codes:

P1664
P1260
P1638
P1000
P1816
...

C1A00
U0100-87

B2141
U1900

C1A00
U0100-87


....

[Cristianbomberos]

Hi, however in general Jaguar instrument panels mount password-protected processors, so I think that with smok you will succeed without problems:wavey:

[Cllau]

try this pinout...:wink:
...............704775

[McDowell]

Thanks for reply

I have tried both ways with every programmer and no luck. I have read that if you get an error it has an EEPROM 93S56. But I don´t see any eeprom and still can´t read it :(

Thanks a lot in advance

[Diagcar1]

No way it has a 93C56 inside.
There is a 9S12DG60 or 9S12DG128.

[McDowell]

Ok thanks to all, I´ve read it with VVDI...Don´t know why did not work before.

As I said I´ve resoldered the dash MPC and pinout. and still having same DTC codes. Sometimes it turns on and sometimes not, when not I get this codes.

P1664
P1260
P1638
P1000
P1816
...

C1A00
U0100-87

B2141
U1900

C1A00
U0100-87


Don´t know ifit could be synchronism issue. I am attaching dash and ECU readings.

Thanks to all for your help. :)

[misterwasp77]

What options did you use to read with vvdi?