View Full Version : Corsa D display SaFE match
ivaylo5225
6th April, 2020, 10:56 AM
Hello colleagues,
I bought another radio and now the display shows SAFE. The car is Corsa D 2007 with CD30MP3 DelphiGrundig.
I attach eeproms from display and radio. 704734
shooting
6th April, 2020, 12:04 PM
Hello colleagues,
I bought another radio and now the display shows SAFE. The car is Corsa D 2007 with CD30MP3 DelphiGrundig.
I attach eeproms from display and radio. 704734
Display dump needs to be in 8bit not 16bit....
Here is your radio set to virgin....
wbr
ivaylo5225
6th April, 2020, 01:47 PM
704787 here is the 8 bit version, thanks in advance !
shooting
6th April, 2020, 02:24 PM
704787 here is the 8 bit version, thanks in advance !
Pair using 3826
wbr
modzzo
9th April, 2020, 07:10 PM
hi can i get pin from gid and cid thanks
rafal
9th April, 2020, 07:13 PM
gid: 8567.........
shooting
9th April, 2020, 07:15 PM
hi can i get pin from gid and cid thanks
GID is 8567 and CID needs to be in 8bit not 16bit
wbr
modzzo
9th April, 2020, 07:19 PM
hi can i get pin from gid and cid thanks
thanks i will try to do 8bit
modzzo
9th April, 2020, 07:41 PM
try this thanks
shooting
9th April, 2020, 07:46 PM
try this thanks
PIN = 3347
wbr
modzzo
9th April, 2020, 08:29 PM
3347 is wrong i got 7 attempts left
rafal
9th April, 2020, 09:28 PM
3347 is correct
part number : 13301079
modzzo
10th April, 2020, 05:37 AM
does anyone have corsa d gid divorced dump file? or cd30 and gir paired dumps thanks
shooting
10th April, 2020, 08:45 AM
3347 is wrong i got 7 attempts left
Use this dump and re-register, then pair using 3347
wbr
uranio00
10th April, 2020, 07:14 PM
Hello guys, I came across a 2014 GID 13452422.
The GID is unmarried so i opened it to read the eeprom.
Unfortunately it seems theyhabe changed something in the design: there is not any eeprom on the PCB. I suspect the code is stored into the micro. Anybody have been dealing with it?
shooting
10th April, 2020, 08:04 PM
Hello guys, I came across a 2014 GID 13452422.
The GID is unmarried so i opened it to read the eeprom.
Unfortunately it seems theyhabe changed something in the design: there is not any eeprom on the PCB. I suspect the code is stored into the micro. Anybody have been dealing with it?
Keep looking ;)
wbr
emes125
2nd June, 2020, 08:27 PM
Can you help me with pin ?
Zann
2nd June, 2020, 08:35 PM
Can you help me with pin ?
Pin 5547
...........
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.