PDA

View Full Version : passat 3c



x3nnyb
9th April, 2020, 09:11 PM
seek help better responsiveness

dominik.m
9th April, 2020, 09:14 PM
Could you be more clear about what you mean?

x3nnyb
9th April, 2020, 09:19 PM
in the lower speed range 900 rpm-2000rpm I have no more power.
he is not responding correctly or on time

kris81orzesze
9th April, 2020, 09:24 PM
in the lower speed range 900 rpm-2000rpm I have no more power
your mod file its not to good.
But if your car has no power under 2k, you have to check your boost logs first. Prabably there is your problem.

dominik.m
9th April, 2020, 09:25 PM
First of all: Write what engine it is. Factory designation, capacity, power and year.
It they more information , it this more quickly can was get help.

x3nnyb
9th April, 2020, 09:30 PM
VW Passat 2,0 Tdi 2006 BMP EDC16 140 hp

dominik.m
9th April, 2020, 09:35 PM
Did you check the DTC? Is the flow meter OK? Have you checked the parameters set and performed with some good program?

x3nnyb
9th April, 2020, 09:46 PM
ok, i will turn off the dtc tomorrow, then i will keep looking.
Thanks a lot

dominik.m
9th April, 2020, 09:58 PM
Check the DTC first. Don't turn it off. It can be a simple mechanical repair!

rafal
9th April, 2020, 10:00 PM
it is exatly same in immo section - people not doing good diagnostic - only asking for mod files

khaos87
9th April, 2020, 10:51 PM
Hey mate, test this file i think will be better perfromance at all..
Pass in PM.
Hit Thanks and rep.
Regards