KIA smart key unit flash

[ilkovelichkov]

Hello DK,i have a problem with SMART KEY UNIT from KIA Sportage QL 2017.The ESCL does not respond,i buy a second hand ESCL and again nothing can't be adapted.Smart keys and ECU are neutralized.I try with ESCL emulator and nothing.SO i'm looking for dump from Smart Key Unit 3M25J MC9S12XEQ384.I have read the mcu but i don't know is it corupted.
I hope somebody have it.
Thank you and have a nice day.

[ilkovelichkov]

these are original files

[trinicolin]

A lot of times the ESCL is the problem. Having used a USED unit you still have to naturalized it using the donor pin code from the donor VIN. If the donor VIN is not known you open unit/s read original dump and write it to donor then naturalize with original pin code.

Sent from my SM-G930F using Tapatalk

[ilkovelichkov]

This has already been done. Inside is the STM8AF.
orig. the and donor flash content are the same, I tried to write orig. eeprom to a new unit and still nothing.
Do you know if launch x431 can adapt keys to this device. When I try it says ESCL does not respond.

[trinicolin]

Have you checked the pin out?

Sent from my SM-G930F using Tapatalk

[ilkovelichkov]

The wiring is OK.
I am looking for OPTION BYTES dump STM8AF6266 from ESCL.I don't make backup of option bytes (only save flash and eeprom) and when i press unlock+erase VVDI Prog erases all chip.
So i hope somebody have option bytes STM8AF6266 ESCL 81900-C5700
Thank you
Regards

[siemion78]

[WYCENA=ilkovelichkov;3859595]Okablowanie jest w porządku.
Poszukuję OPTION BYTES dump STM8AF6266 z ESCL. Nie robię kopii zapasowej bajtów opcji (zapisuję tylko flash i eeprom) a po naciśnięciu unlock+erase VVDI Prog kasuje cały chip.
Więc mam nadzieję, że ktoś ma bajty opcji STM8AF6266 ESCL 81900-C5700
Dziękuję
Pozdrawiam[/QUOTE]

Znalazłeś rozwiązanie?

[PABLOPOLAND]

hello i have the same problem with ix35 escl not responding b1978 error. I used the emulator does not work. lock on stm8af6166. cables fuses ok how did you solve your problem