Need help!!! Ts Holden astra digi prog mileage change and power up no kms display?

[Cbrcluster]

Hi everyone I’ve changed the kms on ts astra cluster however once assembled and powered up no km display? I’ve wired up as per pin outs found on google. I had read eeprom after Change and read the kms I changed so eprom was successful. It’s got me ~~~~ed and help would be appreciated. I’ve attached photos 706238706239706239706240706241706242

[Diagcar1]

Check if the bulb/light is okay.

706251

[volorucinski]

Put a light (by eg. A lantern) to flash from a side of the display and see if you have some digits there, showing km. It might be a bulb burnt there...

[Cbrcluster]

Hi thanks it was a bulb however no digits still showing

[volorucinski]

Unmount the clusters and refit those rubber thing contacts under the display. I've been given you the wiring to power it on the bench. after refitting, put power on it and see if it shows the km.
anyway, what was the reason for changing the ipc on that car? Another time, do not create 2 posts regaarding on the same issue...

I am referring at this post... https://www.digital-kaos.co.uk/forums/showthread.php/819011-Pin-out-ts-Holden-astra-please-2002-model

P. S. YOU CAN HIT THE THANKS BUTTON FOR OUR COLEAGUES THAT TRIED TO HELP YOU. THANK YOU

[Cbrcluster]

My apologies re: 2 posts and thank you for your help really appreciate it.
I will try doing that and let you know if it works thanks again

[evss]

pretty certain it would be a display rubber problem if it has them , not sure if its the same as uk but remeber something in back of mind these had a silly plastic clamp to lock the main plug on rear sometimes it didnt go far enough over . seems strange if rubbers are ok but maybe did you take chip off ? and put back correct orientation?

[Cbrcluster]

Hi thank you I’ll check today. Yes they have a silly plug on the back. I didn’t take chip off so orientations shouldn’t be the problem.
I’ll check these rubber parts