edc16c9 DPF EGR FLAPS OFF

[angel9104]

Can anyone make me this file delete EFR DPF and SWIRL FLAPS OFF Please.I use KESS V2 GENUE if is not problem?
I tuned my car stage 2 and HARD CUT,
Its vauxhall vectra c 1.9CDTI 150PS

[vladimir88]

post file ori to mod

[angel9104]

i dont know why is not possible to post the file

[vladimir88]

post hw sw original ecu

[angel9104]

Opel Vectra 1.9 cdti 150hp 2005 EDC16C9 0281011914 1037371351

[vladimir88]

prove and report

[vladimir88]

how to desidery rmp hard cut

[angel9104]

Can i write this file with Kess v2 slave version,because my kess v2 i think can write only files from Master,my master is Castle street tuning.They make me stage 2 hard cut dpf and egr off but is showin errors when i blanked egr and dpf removed

CASTLE STREET TUNING






CASTLE STREET TUNING

[angel9104]

they make my hard cut to 4.5k rpm

[vladimir88]

look this file is need more pawer

[vladimir88]

prove this is off all flap egr dpf need dtc off send code dtc

[angel9104]

its not working,because i use KESS V2 slave version,genuie tool,and is showing error "GENERIC ERROR"

[angel9104]

Can somebody find me full BDM read whit K-TAG tool
Opel Vectra 1.9 cdti 150hp 2005 EDC16C9 0281011914 1037371351
I need ORIGINAL file from this ECU,full read whith BDM with K-TAG
Tnahks in advance.

[angel9104]

my tuner make me new file-dpf off,efr off,swirl flaps off,and delete dtc for egr and dpf,i write the file but still the car is showing errors and limp mode on.
He say to me>>>okay then the problem is not file because i took these codes out manually so problem is kess is not writing full file, only option is to use BDM Ktag <<<Please HELP!

[alonedark]

edc16c9 whith dpf , i thimk htat this eco dont have dpf, should be edc16c39

[mancioks]

what DTC u still have? this is his last file?

[angel9104]

yes last file,we try with 5 file no results,the error codes are delete manualy he say to me but i dont know...
DTC>P0400-04
P0030-04
P1110-04

[naskochipa]

I can do it if you need contact me

[chrisimerk]

What ever that tuner is saying is rubbish obd read with mpps that is good enough for all that you are requiring I know my daily is a 270bhp saab 1.9tid which is same power plant z19dth you only need bdm if you want to push big power so 180 plus get mpps read flash post here I will do very easy

Regards

[angel9104]

im using Kess V2 slave version,not mpps
Here the ori file

[chrisimerk]

here you go this works for me and tested on others also write this with mpps if you have it or get it as mpps is way better then kess with these ecus, i have no clue how much of the flash kess writes

this is not a stage 2 its only egr dpf and flap off
pass in pm

[angel9104]

can you give pass code please

[alonedark]

Yo Need virtual read or bdm file, obd no read All maps but where is dpf fault code? Thais ecu dont have dpf

[chrisimerk]

Obd read is good enough also This ecu does in fact have a dpf I know as mine is the same I have done the same mods with a obd read with mpps you only need a bdm read if you want to push more then 180bhp

Regards

[angel9104]

thats why im looking for BDM read,for more power and delete EGR,i try so many files but no results,still the same errors.My tuner says i need to read by BDM and write also on BDM,
P.S one error is for lambda sensor,because i also delete cat.convertor

[chrisimerk]

Did you test the file I posted mate

[angel9104]

I have Kess V2 only,i dont have MPPS,and my car now is whith stage2+hardcur,is no point to put ori file.
I need only to delete EGR,flaps..etc.
Because my car is in Lipm mode-no power,and showin car with spaner.

[chrisimerk]

And you can't post the said stage 2 file? Write mine with kess see if the errors are gone and no limp then you will know if you need bdm read or not as I said I have same engine and ecu and I done egr flap and dpf off with obd read

Regards

[angel9104]

And you can't post the said stage 2 file? Write mine with kess see if the errors are gone and no limp then you will know if you need bdm read or not as I said I have same engine and ecu and I done egr flap and dpf off with obd read

RegardsOKim gona try your file

[angel9104]

this file make my tuner last time but still not working

[angel9104]

my Kess V2 is not opening your file is writing<GENERIC ERROR>