PDA

View Full Version : Opel Tigra 1.3 MJD



Nikola977
13th April, 2020, 09:35 AM
Please I need immo off
ECU nr : 55198928
MJD 6JO.T2

Thanks

rafal
13th April, 2020, 09:41 AM
write protect to spi...............

volorucinski
13th April, 2020, 09:50 AM
Hello. I have done it classically by wp the ic pins and didn't work. For all who made the same mistake: must be made on writing with programmer the 8c bits for wp the eep.

Nikola977
13th April, 2020, 10:13 AM
write protect to spi...............
I wrote this file, than 8C to status register ( with upa)
I disconect immo box, but engine not starting, immo lamp blinking...

volorucinski
13th April, 2020, 10:19 AM
I wrote this file, than 8C to status register ( with upa)
I disconect immo box, but engine not starting, immo lamp blinking...

Btw, what was the reason for off on a car with immo2 system? Opcom and reprogramming could solve that...
Put a pic with dtcs... Did you scan all the modules and see what the problem is?

rafal
13th April, 2020, 10:24 AM
pin if need: 1411

Nikola977
13th April, 2020, 10:24 AM
Btw, what was the reason for off on a car with immo2 system? Opcom and reprogramming could solve that...
Put a pic with dtcs... Did you scan all the modules and see what the problem is?
Only in the morning immo lamp is blinking, after few attempts engine is starting. Only in engine ecu i have trouble code about immo signal not receivde. In immobiliser, instrument, body module no trouble codes...

Meat-Head
13th April, 2020, 10:37 AM
On topic:-

1) when cold and not starting can you commucate to everything?

2) put battery charger on overnight repeat next day

3) possable large amount of dk thanks stuck in manifold

Nikola977
13th April, 2020, 10:44 AM
On topic:-

1) when cold and not starting can you commucate to everything?

2) put battery charger on overnight repeat next day

3) possable large amount of dk thanks stuck in manifold

Everything was tested, all modules are readible, no dtcs, only in engine. When immo not blinking engine start and no problems during the day

Nikola977
13th April, 2020, 10:52 AM
I made immo off with Carsoftware 5.2 and engine start without immo box with immo lamp blinking...
Now i will lock with 8C in status reg and try several times starting

kiszka
13th April, 2020, 11:12 AM
Only in the morning immo lamp is blinking, after few attempts engine is starting. Only in engine ecu i have trouble code about immo signal not receivde. In immobiliser, instrument, body module no trouble codes...
how do you want to clear errors in ecus
if the eeprom is secured
when I meet such a car, for repair
I will send him back to see a mechanic
which began this mucking
let papże further

Nikola977
13th April, 2020, 12:42 PM
Eprom is secured after programing with good immo off file. Everything is ok now, engine start without immo box, without instrument pannel..,

kiszka
13th April, 2020, 12:54 PM
Eprom is secured after programing with good immo off file. Everything is ok now, engine start without immo box, without instrument pannel..,
let's wait if something breaks down in the engine equipment
whether you will be able to diagnose it

rafal
13th April, 2020, 12:56 PM
you can disconnect something like temp sensor and make diagnostic - you will see if dtc will appear

Meat-Head
13th April, 2020, 01:04 PM
Then upload your working file no password for next DK member

kiszka
13th April, 2020, 01:06 PM
temperature sensor is obvious
the problem may be a fuel system fault
but I do not penetrate more, because it's not my problem

volorucinski
13th April, 2020, 01:06 PM
Or you can bridge pin 6 with pin 7 into immo box connector and you will have connection from obd to kline

Nikola977
13th April, 2020, 01:09 PM
let's wait if something breaks down in the engine equipment
whether you will be able to diagnose it
Yes, here you can see, MAF sensor plugged, then unplugged ;)

rafal
13th April, 2020, 01:12 PM
all will be ok...............

kiszka
13th April, 2020, 01:12 PM
Or you can bridge pin 6 with pin 7 into immo box connector and you will have connection from obd to kline
I think tigra B doesn't have immo box

rafal
13th April, 2020, 01:13 PM
temperature sensor is obvious
the problem may be a fuel system fault
but I do not penetrate more, because it's not my problem

are you sure that DTC are stored in eeprom? :hmmmm2:

rafal
13th April, 2020, 01:17 PM
I think tigra B doesn't have immo box

https://archiwum.allegro.pl/oferta/opel-tigra-b-petla-immobilizera-immo-13144390-i7015694804.html


https://www.digital-kaos.co.uk/forums/showthread.php/504143-2005-Opel-Tigra-B-pin-code-help (https://archiwum.allegro.pl/oferta/opel-tigra-b-petla-immobilizera-immo-13144390-i7015694804.html)

kiszka
13th April, 2020, 01:17 PM
Yes, here you can see, MAF sensor plugged, then unplugged ;)
check if they disappear by themselves
when you turn off the engine for 5 minutes

kiszka
13th April, 2020, 01:22 PM
https://archiwum.allegro.pl/oferta/opel-tigra-b-petla-immobilizera-immo-13144390-i7015694804.html


(https://archiwum.allegro.pl/oferta/opel-tigra-b-petla-immobilizera-immo-13144390-i7015694804.html)https://www.digital-kaos.co.uk/forums/showthread.php/504143-2005-Opel-Tigra-B-pin-code-help


tigra B is a Corsa C, body module

someone misdescribed and you're trying to prove it to me

Meat-Head
13th April, 2020, 01:25 PM
check if they disappear by themselves
when you turn off the engine for 5 minutes

And/or 3 warmup cycles

often get engine light on unplugging something. Start engine few seconds. Stop let shutdown
once, twice, three, four times a charm light out

rafal
13th April, 2020, 01:29 PM
tigra B is a Corsa C, body module

someone misdescribed and you're trying to prove it to me

you are wrong my friend.............
https://sprzedajemy.pl/opel-tigra-b-combo-corsa-c-kolumna-kierownicza-silnik-1-3-kosow-lacki-2-6bea9f-nr56296714

volorucinski
13th April, 2020, 01:56 PM
I think tigra B doesn't have immo box

It has that sh*tty model with tms370 inside. So, bridging those kline pins, will have the obd connection to ecu

Post edit. If the man said that he disconnected immo box, it was understood that tigra b has the same platform as corsa c, not the CIM crap like corsa d...

volorucinski
13th April, 2020, 02:08 PM
Then upload your working file no password for next DK member

No heart feelings, but... If the man doesn't put a pass on his own work, a Newbie can appear and download it in a sec. Where will be the contribution of the newbie on this forum? It doean't hurt to ask a pass in PM of our guys here.... Better than filling the thread like others, with the "paass please" x1000 pages of crap..

And I think i will give to myself a Thanks button hard press for being mean and brutally right.

rafal
13th April, 2020, 02:14 PM
No heart feelings, but... If the man doesn't put a pass on his own work, a Newbie can appear and download it in a sec. Where will be the contribution of the newbie on this forum? It doean't hurt to ask a pass in PM of our guys here.... Better than filling the thread like others, with the "paass please" x1000 pages of crap..

And I think i will give to myself a Thanks button hard press for being mean and brutally right.

do you mean like last post here: lol
https://www.digital-kaos.co.uk/forums/showthread.php/814303-Please-immo-off-santa-fe-2-2-ecu-bosh-0281012878-or-39105-27800?p=3845210#post3845210

volorucinski
13th April, 2020, 03:58 PM
Yes, here you can see, MAF sensor plugged, then unplugged ;)

That p0602 could be solved by coding the injectors, but not sure right now, if the eep is offed. If there's no check engine lighting, all good...

Nikola977
13th April, 2020, 06:59 PM
That p0602 could be solved by coding the injectors, but not sure right now, if the eep is offed. If there's no check engine lighting, all good...
I will check tommorow and post result

Panathaole
13th April, 2020, 09:50 PM
i think in eeprom keeps mileage, oil counter, dpf reg if present etc...

if you lock the eeprom i suppose none of this info can be valid.....