Hardcut request for 2.0 TDI 140 - Siemens ECU

[khaos87]

Hello mates, i need hardcut only at 4400rpm for that VW 2.0 TDI 140

SW: 6576285395
SW upg.: 03G906018 8096

original file from the car is attached..

[motocrazy]

hardcut 4400rpm
test and report
pass pm

[khaos87]

Thank for the try but no hardcut.. nothing happens.. Anyone else ?

[chrisimerk]

Thank for the try but no hardcut.. nothing happens.. Anyone else ?

here you go hardcut @ 4400

pass in pm

[khaos87]

here you go hardcut @ 4400

pass in pm
Thank you for the try, but again with no luck... no hardcut for that sh*t

[DiegoStud]

Hard one, can't tell I think it's either 498E8-5201rpm or 498EA-6000rpm.
Change them both, wouldn't do any harm.

[chrisimerk]

yes this is a hard one i can easily do launch control on these but hardcut still testing solutions for me

[naskochipa]

Hard one, can't tell I think it's either 498E8-5201rpm or 498EA-6000rpm.
Change them both, wouldn't do any harm.

To my knowledge, this ECU does not have an SVRL?

[chrisimerk]

also these store the axis data you need for hardcut in other part of read so you need a bdm read to change axis data i have tested solution for bdm read still testing with obd reads the solution for bdm read is you change axis in duration maps but obd read dont read full axis

[khaos87]

also these store the axis data you need for hardcut in other part of read so you need a bdm read to change axis data i have tested solution for bdm read still testing with obd reads the solution for bdm read is you change axis in duration maps but obd read dont read full axis
Mate i try it with Roarcuss solution on that ppd. and also didnt work... its ghost inside that ECU...

[mrjay88]

This is my favourite ecu to work on this ecu does not have svrl its very unique i have a siemens ppd ecu in my golf so here you go pal 100000% tried and tested please dont forget to thanks and rep pass in pm

[DiegoStud]

To my knowledge, this ECU does not have an SVRL?
Did this not work for you Nasko? ;)

mrjay88- are you refering to this particular software version or PPD1.1? Very unique and surprising.

Must say these are my least favourite ECU lol

[mrjay88]

Did this not work for you Nasko? ;)

mrjay88- are you refering to this particular software version or PPD1.1? Very unique and surprising.

Must say these are my least favourite ECU lol

no mate just the siemens ppd ecu in general is unique doesnt matter if its a ppd1.1 or 1.2 etc.. i love tuning them but no body seems to like them lol

[TuningInside83]

also these store the axis data you need for hardcut in other part of read so you need a bdm read to change axis data i have tested solution for bdm read still testing with obd reads the solution for bdm read is you change axis in duration maps but obd read dont read full axis


: Rofl:

[mrjay88]

no you dont need a full bdm dump for this ecu to make a popcorn thats bullshit theres otherways that i have worked out and works everytime so stop speaking italian this an english forum am not stupid this ecu is what i mainly deal with i speak from experience i got thanks and rep from the file i made clearly meaning my map works

[chrisimerk]

mrjay i posted my comment before you posted yours so my comment was not aimed at you my friend its good that you have solution for obd read but its just tuninginside who just copied what i put he is a waste of space and loves me abit too much constantly stalking me lol

[mrjay88]

mrjay i posted my comment before you posted yours so my comment was not aimed at you my friend its good that you have solution for obd read but its just tuninginside who just copied what i put he is a waste of space and loves me abit too much contently stalking me lol

oh ok mate i do apologise