Ford Focus 16tdci edc16c34 P0380 dtc and limp mode remove

[ECU KING]

Anyone can help with the solution i tried the software solution but it doesn't work anyone whether there is a manual solution for it or some working thank you

[sparkecu]

test this and report

[ECU KING]

test this and report


The car still has error code p0380 and limp mod

[centrohifi]

friend try this file, unplug spark plug connector
pw in pm

[ECU KING]

friend try this file, unplug spark plug connector
pw in pm


The car does not start with this file

[prevozsa]

What is your problem? Car is in safe mode(limp mode)?

[prevozsa]

Here your file after tnx and reputation pass

[mrjay88]

Try this mate if my solution works please click thanks and rep pass in pm

[ECU KING]

Try this mate if my solution works please click thanks and rep pass in pm

Your file does not work on it, only the DTC colt is still removed in emergency mode

[robert1232]

Hey
Replace all glow plug and trouble gone . Turning off the error will do nothing


[QUOTE = ECU KING; 3846663] Każdy może pomóc w rozwiązaniu. Wypróbowałem oprogramowanie, ale nikomu to nie pomaga, czy jest rozwiązanie ręczne, czy też działające, dziękuję [/ QUOTE]

[centrohifi]

Your file does not work on it, only the DTC colt is still removed in emergency mode

I worked other files, of ford! it is difficult, you have to remove the recovery, on the map and dtc. now I try to get you another file

[robert1232]

I don't know, maybe there is another option I didn't know about

almost in every tdci (hdi) if any glow plug is broken it shows a damaged module and then goes into safe mode

[QUOTE = centrohifi; 3847398] Pracowałem z innymi plikami, ford! to trudne, musisz usunąć odzyskiwanie, na mapie i dtc. teraz próbuję uzyskać inny plik [/ QUOTE]

[centrohifi]

Your file does not work on it, only the DTC colt is still removed in emergency mode

your ecu 0281011701 ?? Read bdm or obd ?

[prevozsa]

ECU KING whay not use my file 100% work???

[angelx431]

[QUOTE=ECU KING;3846663]Anyone can help with the solution i tried the software solution but it doesn't work anyone whether there is a manual solution for it or some working thank you[/QUOTE
100% OK Pass PM