BMW cas 3++ syncro DME CAS 3++

[triak88]

I have a BMW with flat battery I woth syncro DME with CAS3++ with VVDI2 but I can. what is wrong, can VVDI2 to the job?

The second question is programer BEEPROG can read MC9S12XDP512CAL and if someone have diagram?

cas is 5WK4 9513CBR

[xyznia]

what bmw? beeprog will not help.for sync use bmw Rheingold inpa or any universal diagnostic who have this function

[rm23]

avdi online will do 100%, what is your location ?

[omarino]

Most of diagnostic tool do this function
Try to use launch if you have it
Thanks


Envoyé de mon iPhone en utilisant Tapatalk

[triak88]

I am from SLOVENIA and VVDI2 have this function to do sycro DME CAS but not work.I do several times but not work, saw i ask if i do somethig wrong,mayby algoritem is wrong.

Also someone do Sycro DME CAS 3+ succesly with VVDI2 and how?

[PixelsFixed]

Follow this process. ISTA is the best solution but any good diagnostic will do it.

Clear all fault codes
Disconnect battery for at least 20 minutes
Reconnect battery
Connect Battery Support Unit
DO NOT try to start the car
Clear codes again
Do CAS/DME synch

[yui]

error codes after try start car? in engine ecu?

[kevfield]

post files here lets see

Thanks Kev

[triak88]

Hello!
I did what pixelsfixed and the car stared and fixed the problem.