PDA

View Full Version : BMW E36 1.6i - TURBO added - need make file modification



number7hd
17th April, 2020, 07:02 AM
0261203660
CAR is builded as drift car.
Turbo from VW was added - now need to add more fuel, couse there is too much air.
Till 4000 RPM I can feel power, but after is no power.
May I count on help PLEASE ?

kris81orzesze
17th April, 2020, 08:09 AM
Have you there afr gauge installed ? bigger injectors, adiustable fuel pressure reg?
To do this right you need at least something to check and log your afr
0261203660
CAR is builded as drift car.
Turbo from VW was added - now need to add more fuel, couse there is too much air.
Till 4000 RPM I can feel power, but after is no power.
May I count on help PLEASE ?

Lambda1
17th April, 2020, 09:27 AM
bigger injectors, maf ... needen. So less informations... so nobody can help.

number7hd
17th April, 2020, 10:04 AM
Bigger injectors are already installe, MAF too...
Just need more fuel in MAP program...

number7hd
20th April, 2020, 07:02 AM
All I need is to increase fuel injection, expecially after 4000 RPM...
Is someone able to do it PLEASE ?

Lambda1
20th April, 2020, 08:42 AM
we told you often enough you need to calibrate your file, log... but you wouldnt hear. Hope you will get satisfied with this.
Retarded Ignition and add some fuel.

number7hd
21st April, 2020, 01:02 PM
It is pretty good right now, but if there were more fuel betwen 3500 - 5000 RPM it will be better...
May I count on modification? Thank You ...