VW Touareg Kessy - Continental

[tyancool1995]

Can someone please give me the pincode of this kessy (Continental). VVDI2 gives me 43212, but the car doesnt accept it. Please someone with Abrites :? :) Thanks

[brend]

........:driver:........

[tyancool1995]

Thanks for the fast answer. I will try it tomorrow.

[trinicolin]

VIN ending 55926
PIN 43212

[trinicolin]

VIN ending 55926
PIN 43212

this is the correct pin

PIN 11824

[brend]

I think correct login is......43212



this is the correct pin

PIN 11824

[tyancool1995]

I also thought the pin code was 43212 but VCDS doesnt accept it. The car is 2005 year but with Continental 5WK48827

[immoneard]

There is no way to read pin with Just eeprom on Conti Kessy. You need to have VVDI Prog and VVDI2.
VVDI Prog connects to Conti Kessy with soldering wires to it, Reads file , then you have to use VVDI2 on Key progam selection( do not use on dunmp tool) load dump and it will display correct CS, and Pin,on same page you pre-program key and adopt it.

[dimon9555]

There is no way to read pin with Just eeprom on Conti Kessy.

This is not true.

No one wrote the correct pin, because the correct 08984)))))

[tothzsolt]

tyancool1995 (https://www.digital-kaos.co.uk/forums/member.php/614803-tyancool1995)

Login code:43212 ok

Immo Number: VWZ3Z0C3146750

IMMO STATUS: 1

3 KEY PROGRAMED TO MODUL:
-- 4948BE07
-- 335A5FD6
-- 3F5401FF

VIN: WVGZZZ7LZ4D055926

[trinicolin]

I also thought the pin code was 43212 but VCDS doesnt accept it. The car is 2005 year but with Continental 5WK48827Any updates on this job?

Sent from my SM-G930F using Tapatalk

[ngakson2002]

Can someone please give me the pincode of this kessy (Continental). VVDI2 gives me 43212, but the car doesnt accept it. Please someone with Abrites :? :) Thanks


With your dump swap in 93c86x8bit i have the following

VIN: WVGZZZ7LZ4D055926
PIN CODE: 57469
Key1 07 29 33 5A
Key2 D6 F3 3F 54

Best Regards

[tyancool1995]

Guys, Immoneard was right. Kessy-Continental must be read with VVDIPROG - with points. I have read it and the right PIN was 08984.
I'm trying to adapt new Kessy to the car (VDO-SIemens) but the old one was Continental. Is it possible cuz VCDS gives me an error "malfuunction" when i try to write the old PIN CODE (from the old Kessy) :?

[immoneard]

What year is the car ?

[tyancool1995]

2005 year, but is with Continental

[tyancool1995]

Guys, the car accept the new Kessy VDO-Siemens PIN Code but when i try to adapt it VCDS gives me "malfunction" :? Should I first make a key of the new Kessy VDO-Siemens and then to try to adapt it to the car :?

[dimon9555]

By dump it is possible to adapt everything with old keys

[tyancool1995]

Can someone please put the old CS and PIN from Continental Kessy in the new VDO-Siemens Kessy. I think then the car will start working. I have tried to find it manually but couldn't see it Thanks

Continental Kessy (old) - CS - EC 18 1C 70 C9 12 F8 PIN - 08984
VDO-Siemens (new) - CS - E6 FE 95 6F 19 8D E5 PIN - 03784

THANKS !!!

[ricked]

Can someone please put the old CS and PIN from Continental Kessy in the new VDO-Siemens Kessy. I think then the car will start working. I have tried to find it manually but couldn't see it Thanks

Continental Kessy (old) - CS - EC 18 1C 70 C9 12 F8 PIN - 08984
VDO-Siemens (new) - CS - E6 FE 95 6F 19 8D E5 PIN - 03784

THANKS !!!

your request

btw your car will "not" start you need to addapt keys, immo + more...

ask pass in pm only

[tyancool1995]

I used your file and just changed the VIN and IMMO-ID manually and after adaptation of ELV the car started. Thanks to all of you.

[trinicolin]

I used your file and just changed the VIN and IMMO-ID manually and after adaptation of ELV the car started. Thanks to all of you.Very good feedback.

Sent from my SM-G930F using Tapatalk

[ASCM]

I used your file and just changed the VIN and IMMO-ID manually and after adaptation of ELV the car started. Thanks to all of you.How did you changed vin and immo id
And which tool u used for elv adaption?

Sent from my SM-J415F using Tapatalk

[immoneard]

How did you changed vin and immo id
And which tool u used for elv adaption?

Sent from my SM-J415F using Tapatalk
VVDI2 dump tool will change VIN and ID.

ADVI has EVL adaptation, it is free function.

[tyancool1995]

I used VCDS for ELV adapdation, but when i did it at 051 channel the success was after the 5th atempt. I dont know why. So you have to be patient :D. Yes, VVDI2 dump too can change VIN and ID also. The only question in my head is how mr. "ricked" changed the PIN and CS. Which tool did he use

[ricked]

I used VCDS for ELV adapdation, but when i did it at 051 channel the success was after the 5th atempt. I dont know why. So you have to be patient :D. Yes, VVDI2 dump too can change VIN and ID also. The only question in my head is how mr. "ricked" changed the PIN and CS. Which tool did he use

i did use brain.exe

[immoneard]

I used VCDS for ELV adapdation, but when i did it at 051 channel the success was after the 5th atempt. I dont know why. So you have to be patient :D. Yes, VVDI2 dump too can change VIN and ID also. The only question in my head is how mr. "ricked" changed the PIN and CS. Which tool did he use

What did you put in New value at Ch51 ?

[tyancool1995]

1, just reLearned it

[tyancool1995]

I think so :D. so it is possible to see PIN and CS without convert the file :? Thanks

[ASCM]

This is not true.

No one wrote the correct pin, because the correct 08984)))))How did decrypted the kessy continental
To find the correct pin?

Sent from my SM-J415F using Tapatalk