PDA

View Full Version : Audi A6 auto trans to manual


gelencserg
21st April, 2020, 07:45 AM
Hi all Friend!
Please help!
How to convert from auto trans ecu to manula trans?
Audi A6 C5 2.5tdi AKE engine code.
VCDS not working.
The coding is in the ecu map, not the eprom.
Or other map content?
And immo off possible?
Thanks!
708312
kiszka
21st April, 2020, 10:25 AM
Hi all Friend!
Please help!
How to convert from auto trans ecu to manula trans?
Audi A6 C5 2.5tdi AKE engine code.
VCDS not working.
The coding is in the ecu map, not the eprom.
Or other map content?
And immo off possible?
Thanks!
708312
EDC
4B2 907 401E = 4B2 997 401 DX automat
EDC
4B2 907 401A = 4B2 997 401 AX manual
EDC
4B2 907 401 = 4B2 997 401 X manual
abbaci
21st April, 2020, 01:52 PM
hi all dk , i have the same probleme with in audi a6 2.5 tdi ake i have convert the tran from auto to manuelle ; now i have dtc p0550 START OF INJECTION .I HAVE CHANGE ECU . AND THE SAME PROBLEME . NO WAY TO START HOT THX . PLZZZZZ THE SOLUTION HELLLLLLLLP ME
gelencserg
21st April, 2020, 03:10 PM
hi all dk , i have the same probleme with in audi a6 2.5 tdi ake i have convert the tran from auto to manuelle ; now i have dtc p0550 START OF INJECTION .I HAVE CHANGE ECU . AND THE SAME PROBLEME . NO WAY TO START HOT THX . PLZZZZZ THE SOLUTION HELLLLLLLLP ME

http://wiki.ross-tech.com/wiki/index.php/00550
gelencserg
21st April, 2020, 03:15 PM
4B2 907 401E = 4B2 997 401 DX automat
EDC
4B2 907 401A = 4B2 997 401 AX manual
EDC
4B2 907 401 = 4B2 997 401 X manual[/QUOTE]

I found 4B2 907 401 content.
708448
The car starts and stops.
immo problem.
Possible immo off? Flash or eeprom?
The ecu pin code is missing.
Thanks!
gelencserg
21st April, 2020, 04:00 PM
4B2 907 401E = 4B2 997 401 DX automat
EDC
4B2 907 401A = 4B2 997 401 AX manual
EDC
4B2 907 401 = 4B2 997 401 X manual

I found 4B2 907 401 content.
708448
The car starts and stops.
immo problem.
Possible immo off? Flash or eeprom?
The ecu pin code is missing.
Thanks![/QUOTE]

Carprog immo off solution work, only eprom.
Now "01044 - control module incorrectly coded" dtc
abbaci
22nd April, 2020, 06:02 PM
http://wiki.ross-tech.com/wiki/index.php/00550
all ok but the fault stay intermetant ; i check any thing
kiszka
22nd April, 2020, 09:11 PM
pin is 07941