PCMflash question

[aqua_life]

Hello,
First let me tell that most jobs I do is ECU clone on bench. Don´t make much OBD software tuning, etc.
Until now I use FGTech for EDC16, Marelli on BDM. And also some Tricore EDC17 / MED17.
However more recent Tricore EDC17 / MED17 my tool can´t make password to read and write.

So, I must buy a new tool.
From what I searched PCMflash is a good option.
I see that module 53 makes all tricore ECU´s correct ?
Should I also buy module 71 ?
From what I understand module 53 need to open ECU (no problem for me) and module 71 is able to do without opening ECU. Is this correct ?

I also see that I must buy Scanmatik interface to work with this. However I don´t understand if I also need to buy Bosch GPT adaptor or not ?
What would you recommend me to buy ?

Thank you for your help.

[maajkii]

https://chat.whatsapp.com/IwNmPmwprjx9MNR8k3TyIl

Thats our PCM Flash Group. Feel free to ask questions About PCM There. :)

Wysłane z mojego SM-G975F przy użyciu Tapatalka

[figani]

From what I searched PCMflash is a good option.

YES...:applause:

I see that module 53 makes all tricore ECU´s correct ?

Unfortunately NO...
but you will not find any tool on market which is able to do all...

Should I also buy module 71 ?

same as 53, but you don´t need to open Bosch ME/MED/EDC17 supoorted ECU´s...
not all Bosch are supported but a lot´s of them...

From what I understand module 53 need to open ECU (no problem for me) and module 71 is able to do without opening ECU. Is this correct ?

YES...:tears_of_joy:

I also see that I must buy Scanmatik interface to work with this.

Scanmatik 2 Pro in combination with bench cable (approx. 50 USD) you can do all 53/71 modul supported ecu...

However I don´t understand if I also need to buy Bosch GPT adaptor or not ?

you don´t need to buy this GPT Adapter if you buy scanmatik...


What would you recommend me to buy ?

definitely Scanmatik 2 Pro, it´s a real allround talent...




answers are red market, maybe it´s helpful...