View Full Version : opel insignia ecu edc17c59 clone
mobiletehnik
21st April, 2020, 02:55 PM
Opel Insignia 2.0CDTI 88kw 2014MY
i read ecu with clone ktag and het error in comunication now car wont start
i do this edc17c59 cuple times before with my ktag but with this one I dont know what go wrong :(
i buy donor ecu all the same
hw and sw all same
bosch number same
how i can clone this ecu ...I don t have backup of old ecu
or immo off is possible on opel edc17c59?
will car start if i replace just eeprom?
thank you
keturi
21st April, 2020, 03:56 PM
You said you did this ecu before, why you not save backup?
This ecu EDC17C59 is very sensitive for programming, have had couple of them damaged. Genuine KTAG can do straight copy<>paste to the another same part number ecu, tested couple times, even Ktag shows "unclonable".
Eeprom you can not swap, because there are no physical external eeprom, it is emulated inside Tricore.
To program another ecu is complicate, because need to use TIS2Web with the special account. Simple ordered online account not let work with IMMO parts(tested as well).
Maybe somebody have IMMO off solution.
mobiletehnik
21st April, 2020, 04:03 PM
You said you did this ecu before, why you not save backup?
This ecu EDC17C59 is very sensitive for programming, have had couple of them damaged. Genuine KTAG can do straight copy<>paste to the another same part number ecu, tested couple times, even Ktag shows "unclonable".
Eeprom you can not swap, because there are no physical external eeprom, it is emulated inside Tricore.
To program another ecu is complicate, because need to use TIS2Web with the special account. Simple ordered online account not let work with IMMO parts(tested as well).
Maybe somebody have IMMO off solution.
i said i do another edc17c59 without problem on ktag clone..i dont know what wrong with this one
how to clone with genuine KTAG when ecu no comunication
karl90
19th January, 2021, 08:07 AM
Good morning. I have a similar problem. I have a full backup of old ecu.
If I buy an identical ecu, what can I do to use car? Is is sufficient do this?
- Dump of new ecu
- Write old file to the new ecu
If immo problem :
Extract pincode from new ecu
Program immo with op com
Is it right? Urgent
keturi
19th January, 2021, 10:37 AM
Just copy your full backup file to the second hand identical ecu with genuine tool and all done.
It is impossible to program ecu with op-com. Nothing to do with pin code. It is just online solution with extended account.
mobiletehnik
19th January, 2021, 02:29 PM
Just copy your full backup file to the second hand identical ecu with genuine tool and all done.
It is impossible to program ecu with op-com. Nothing to do with pin code. It is just online solution with extended account.
it is not true,i finish this car with pin from bcm and opcom
rafal
19th January, 2021, 05:25 PM
it is not true,i finish this car with pin from bcm and opcom
that is correct.................
DudaTK
5th January, 2022, 04:54 PM
Hello. Is it true that op-com and car pass are enough to add this ecu?
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.