Vito W639 EZS CLONE

[rui41]

Hi there
Cloning a Merc Vito W639 with Mask 3K85k. the problem is R270 does not read flash memory.
Is it necessary to tranfer the flash of the 2 MCSs or the IMMO and Adometer epreom will be fine.
The donor is a 3K85K and the receiver is 4J74Y

[mclarenax]

The number is the same ezs?

Отправлено с моего VOG-L29 через Tapatalk

[brend]

.............:driver:...........

[brend]

..............:captain:.......

[brend]

Hi there
Cloning a Merc Vito W639 with Mask 3K85k. the problem is R270 does not read flash memory.
Is it necessary to tranfer the flash of the 2 MCSs or the IMMO and Adometer epreom will be fine.
The donor is a 3K85K and the receiver is 4J74Y

708771
If prt nr. is same flash must by same too,enough only eep dump.
If part nr. different only full flash+eep.

[rui41]

639 545 06 08------------- 639 545 01 08 all the others are different

[rui41]

Thank very much.

[aqua_life]

I have much experience with those EZS.
All these W639 EZS are interchangable:
6395450108
6395450508
6395450608

Partnumber 0108 are the ones that gives more problems. Its the oldest model.
50% of EZS I am able to repair.
The rest of them I just unsolder the 2 processors and solder them on another EZS (partnumber 0108 or 0508 or 0608).
You can do this no problem.

I have ETL to read and write these processors but in this case you don´t need to waste time.
Just unsolder both processors and solder on another EZS.

Tested many times, without problem.

If I helped you, press Thanks.

[rui41]

can you please help with the EZS number? is it the one at the top with the Dete or the one above the bar code?