Flashed ecu smart 450

[billys vtec]

Hello
I went to write a mod file with the kess in an Smart 450 0,6.the ecu flashed and shows in the dash --------... I took out the eprom I wrote a file together with the flash (boot mode)I had backup with galleto 54 and it doesn't take my id in ecu data so it doesn't work in the car ... my ecu 0261205005 (tel:0261205005)
709811

[figani]

Hello
I went to write a mod file with the kess in an Smart 450 0,6.the ecu flashed and shows in the dash --------... I took out the eprom I wrote a file together with the flash (boot mode)I had backup with galleto 54 and it doesn't take my id in ecu data so it doesn't work in the car ... my ecu 0261205005 (tel:0261205005)
709811


you desolder eeprom...?
for what...?


if you have backup just write it, why you complicate...?

[billys vtec]

709888
Desolder because galleto v54 says eeprom not writable.
backup I have another ecu (eprom and flash) I wrote them but it doesn't work.
I tried with the same software and different (always a pair of eprom and flash)

[silver1]

write the flash eeprom from original second ecu as it was, and programming key to the car. the car will start

[billys vtec]

write the flash eeprom from original second ecu as it was, and programming key to the car. the car will start
I do this exactly but it doesn't work with the car ... and in my galletto it shows in ecu data (---------)
if I transfer the eeprom flash from another ecu it works ... if I only transfer the files it only doesn't work

[ZiZiTun]

post file whitch you have read from car, maby it is problem in file. In this ECU is 29F400 eprom. Probably you can use file version 1037351609, 1037351581, 1037351756, 1037351592, 1037351456, 1037351625, 1037351857

[billys vtec]

post file whitch you have read from car, maby it is problem in file. In this ECU is 29F400 eprom. Probably you can use file version 1037351609, 1037351581, 1037351756, 1037351592, 1037351456, 1037351625, 1037351857

1037351756 bul i want and eprom 24c02

[figani]

for what other eeprom...
use or own one...
it´s not otp tricore...

find any 600 ccm flash equal which...
and write and start car...
and be happy...

[billys vtec]

I have written 3 different flash and the car does not work ... on eeprom on smart it also writes proportions for the gear changes ...

[figani]

on eeprom on smart it also writes proportions for the gear changes ...

reallllllly....?

what do you think why I write to you all time that you should write your own eeprom...?
guess....?



write your Eeprom and any flash...
and connect ecu, and post what you get on dash when you give ignition...

[billys vtec]

reallllllly....?

what do you think why I write to you all time that you should write your own eeprom...?
guess....?



write your Eeprom and any flash...
and connect ecu, and post what you get on dash when you give ignition...
Test write again new fash 710127

[billys vtec]

Does anyone have a virgin eeprom to try if it works ??? I have DAS for new ecu activation

[billys vtec]

for what other eeprom...
use or own one...
it´s not otp tricore...

find any 600 ccm flash equal which...
and write and start car...
and be happy...

write flash bootmode or desolder and write write with programmer????

[figani]

write flash bootmode or desolder and write write with programmer????

as you want...
is same...
just write...

[figani]

Does anyone have a virgin eeprom to try if it works ??? I have DAS for new ecu activation

adapt key with das and adapt clutch...
that´s it...
there is no need for virgin...
its same...
it´s all a 15 sec job...

[billys vtec]

adapt key with das and adapt clutch...
that´s it...
there is no need for virgin...
its same...
it´s all a 15 sec job...

write 2 different flash 712411

[figani]

your smart has 599 engine...?
one or two lamdasondes...?
VIN...?

[billys vtec]

your smart has 599 engine...?
one or two lamdasondes...?
VIN...?
Yes my friend 599 and 2 lamda...

[billys vtec]

something crazy is happening to me ... i have put in a 700 cc ecu (006) quite a few mod files with kess and everything is fine ... i have tried to put a mod file in a 600cc smart with 1lamda ecu (004) all just fine .. .I have tried 2 smart 600cc 2lamda ecu (005) as soon as I put mod file the ecu flashed then I write the original with galletto on desk and everything is fine as soon as i go to put the mod file with galleto ecu flashed again ... it has something especially this ecu ??

[billys vtec]

anyone for help ????

[billys vtec]

isn't there anyone who has put a mod file in this ecu ???

[figani]

hundreds, without any problems...
but to be honest after reading all your posts, I still don´t understand waht you want do or what you don´t want do...?

[billys vtec]

I'm trying to write .mod file in smart 600cc 2 lamda with kess and v54 and ecu hangs ... as soon as i restore the original file the car works

[figani]

I'm trying to write .mod file in smart 600cc 2 lamda with kess and v54 and ecu hangs ... as soon as i restore the original file the car works

Your file is bad...!
Try it with another file, so easy....
For what you need 10 and more posts...

[billys vtec]

I have tried over 4 tun files that have been tested by an acquaintance of mine on a car