problem with power on MB Vito

[Junkyard Dog]

Hi colegues, i have Vito W639 2.2cdi 95hp...i remap but i dont feel any difference between ori and mod. Can someone say me where i make mistake? I will be happy when somebody react who have skills with MB remaping. i missed some important limiters? Thanks for help :)

[naskochipa]

Hi colegues, i have Vito W639 2.2cdi 95hp...i remap but i dont feel any difference between ori and mod. Can someone say me where i make mistake? I will be happy when somebody react who have skills with MB remaping. i missed some important limiters? Thanks for help :)

Thanks and Reputation = Pass
Pass-PM

Test and report

You had a lot of missed cards the duration cards were not good and there were a lot of missed cards for turbo and turbo lim

[Junkyard Dog]

Thanks and Reputation = Pass
Pass-PM

Test and report

You had a lot of missed cards the duration cards were not good and there were a lot of missed cards for turbo and turbo lim

pass please

[JoeBB]

Still with DW and torque lims only you should have felt difference. check to see if file is getting written or else is a problem with the car!

[naskochipa]

pass- send :)

[Junkyard Dog]

pass- send :)


yes THX :) aslo thanks NASTASE (https://www.digital-kaos.co.uk/forums/member.php/130435-NASTASE) and bobolin4o (https://www.digital-kaos.co.uk/forums/member.php/150906-bobolin4o)

[Junkyard Dog]

I make some changes on turbo request+gear nm limits make logs and car run like ori (same iq,boost etc.max IQ what i reach is +-55mm3)i think ECU have 2 datablock and my kess v2 clone (can) read only first. I think this is most relevant reason

[Junkyard Dog]

But i try write egr off and all was ok... This 2 block have same egr hys.maps? + dtc table?

[kris81orzesze]

yes some of them have maps and dtc table and other data in the other block, there could be your problem. Read on the bdm and you will see.
But i try write egr off and all was ok... This 2 block have same egr hys.maps? + dtc table?

[Junkyard Dog]

yes some of them have maps and dtc table and other data in the other block, there could be your problem. Read on the bdm and you will see.

But egr off+dtc off working OK without problem. But " tune " not. i attached my last mod what i try i know mod have some mistakes but i with him reach +- 55mm3 as original file.

[kris81orzesze]

look i have one mercedes example green area is just obd read and green and red is bdm read with maps too.

[Junkyard Dog]

look i have one mercedes example green area is just obd read and green and red is bdm read with maps too.


yes you think its in " bad " OBD reading... by obd dont read all data/datablock what car using.

[kris81orzesze]

the best thing will bdm read. Or if you have other tool to try on obd
yes you think its in " bad " OBD reading... by obd dont read all data/datablock what car using.

[Junkyard Dog]

Or egr make limp mode? Because plug was disconnect.But i am confused because engine can i rev up to 4000rpm and 100-130km/h no problem too...,..............invaded my 1 thing put on DW (pedal) 0 value and with this i confirm... Or?

[Junkyard Dog]

Thanks.... Can other masters react on my post please. :)

[kris81orzesze]

yes you think its in " bad " OBD reading... by obd dont read all data/datablock what car using.
thats bdm read of your software,so there is no maps in other block...

[Junkyard Dog]

thats bdm read of your software,so there is no maps in other block...


Thanks, this mean i have some others NM or IQ limiters. Or i miss some fuel map.


Is this last limiters who hold me on stock power?

1EAF9C
1EAFDE
1EB020
1EB062

[kris81orzesze]

no they are fuel control limiters

[Junkyard Dog]

i am really confused what hold me on stock power.