VW 2.5 TDI CR Bosch EDC16CP34 DPF/EGR/SWIRL-FLAP OFF

[NStuning]

Hello everyone!

Please, i need DPF OFF / EGR OFF (DTC off) / SWIRL - FLAP OFF (DTC OFF) for my Volkswagen Crafter 2.5 TDI 2009.

074 906 032BA 5176
EDC 16CP34 4.4
SW: 1037503935
HW: 0 281 014 132

Thanks in advance!

[Baddog84]

here is your file
pass pm

[NStuning]

here is your file
pass pm

Hi,

i did the writing now with the FULL BDM KTAG and dpf egr off they seem ok, but swirl-flap I got an error when I unplugged the connector P0122, P2016 and P3139 error everything related to swirl-flap . Can this be resolved as well,too?
Even when the flap connector is plugged in and I drive I get these two errors P3139 and P2016 and it loses power after 3000 rpm.

Thank you

[kris81orzesze]

dpf egr flaps off file

[NStuning]

dpf egr flaps off file


Still errors on swirl-flap P2016 and P3139...and it is not possible to unplug the connector without having a P0122 error.

[prevozsa]

here your file after tnx and rep pass
diconect egr and swirl conector

[NStuning]

here your file after tnx and rep pass
diconect egr and swirl conector

Same as all files so far ... no SWIRL-FLAP OFF. Still errors P3139 and P2016. After unplugging the connector on the swirl-flap, the heater light flashes.

[kris81orzesze]

Same as all files so far ... no SWIRL-FLAP OFF. Still errors P3139 and P2016. After unplugging the connector on the swirl-flap, the heater light flashes.
should be ok now

[NStuning]

should be ok now

Hi,

Yes everything okey with egr and swirl-flap now...only one dtc on DPF when I disconnect DPF sensor for exaust temp. P0546. Can you please just delete this error P0546 and that´s all :) ? Sorry to bother you that much :(

Thank you

[kris81orzesze]

Hi,

Yes everything okey with egr and swirl-flap now...only one dtc on DPF when I disconnect DPF sensor for exaust temp. P0546. Can you please just delete this error P0546 and that´s all :) ? Sorry to bother you that much :(

Thank you
+dtc off file