Hmm. Broken boot pinout on the ecu.

[Mauiii]

Does someone know how to boot bosh edc17c10 when the boot place is damagde?
some tips and tricks?

Also need help to maybe clone a ecu.
hit me up with a pm if you know your stuff :)

[carmageddon]

buy ktm bench (on aliexpress for example) and you can do boot r/w/chk without opening the ecu

https://it.aliexpress.com/item/4000395802235.html?spm=a2g0o.cart.0.0.2f1a3c00qx90 KX&mp=1

[Mauiii]

I cant wait 3 weeks intill i get that system.

is not another way to do it?

[Junkyard Dog]

Does someone know how to boot bosh edc17c10 when the boot place is damagde?
some tips and tricks?

Also need help to maybe clone a ecu.
hit me up with a pm if you know your stuff :)

Post here photos how is broken.

[Trice1001]

On bench is build ecu of from car and pin out? with ktm bench alle ecu works?

[Mauiii]

Im not getting connection to the boot pin.

[Junkyard Dog]

Im not getting connection to the boot pin.

Better quality photo

[Prichyndel]

Easy fix if you are a micro solderer :) where u from ? i could help if u'r in the UK..

[Mauiii]

Im from norway soooo ��

[Prichyndel]

...Pm sent..

[Inquizit0r]

Clean track by scalpel and solder to it boot wire. Nothing to hard...

[heteromies]

interesting, have same problem. How bootpin is made, layout? Goes throught PCB or how?

[Junkyard Dog]

interesting, have same problem. How bootpin is made, layout? Goes throught PCB or how?

You can connect on road what is going from boot pin

[heteromies]

You can connect on road what is going from boot pin

Sorry, not got your point, not undestanding. Is there a way to find bootpin layout....?

[figani]

Sorry, not got your point, not undestanding. Is there a way to find bootpin layout....?


read post #11...
it´s explained there...

[Prichyndel]

Post a good quality photo and i will mark it what u have to solder... but if you are not experienced you might damage it beyond repair.

[heteromies]

Post a good quality photo and i will mark it what u have to solder... but if you are not experienced you might damage it beyond repair.

https://mega.nz/file/Ip82SCab#ocpbMwdBJGY-MxJILQ_EvBWbmXbVvZVY6XXXFuDrxTE

[heteromies]

here can see photo if can add direct...

[heteromies]

here can see photo if can add direct...

.............. or what kind of photo want to see?

[figani]

.............. or what kind of photo want to see?


mate your picture is not usefull...
if you has a brooken and not longer to use boot point...
check if there is an line to the boot point...
just scratch this line, and use a needle or solder on this line...
enlarge this picture, I have drawn a small red line...
just as en example...

[heteromies]

mate your picture is not usefull...
if you has a brooken and not longer to use boot point...
check if there is an line to the boot point...
just scratch this line, and use a needle or solder on this line...
enlarge this picture, I have drawn a small red line...
just as en example...

i think i understand your point. But in my photo, there is all what can see bootpin spot. Nothing to tracing. Bootpin layout tracing stop near solder point, and that all is got damages...

[figani]

post #2 could also be a solution...
with the most new ori and updated tools/sw need not longer to open ecu´s (not all, but the most)...

[heteromies]

post #2 could also be a solution...
with the most new ori and updated tools/sw need not longer to open ecu´s (not all, but the most)...

Yes, genuine PCMFlasher is tool should take care this. It just takes about one month to get one....

[George Orwell]

Hey. You can buy a ktm bench to solve this issue. It will help you to boot the system. Check it up on the Aliexpress. There is a bunch of utilities for a good price. Just be sure you read all the description. It can be done easier by usinghttps://alitools.io/en (https://alitools.io/en) it shows the best prices, real reviews, sellers trust factor and can also track your parcel. Good luck )

[mihaiti]

You can try VR , virtual reading, ghet ori file and the write with other tool then bench tool. You can ask someone who has flex to write it back for you! This tool can write via obd, or bench without opening the ecu!