Need full BDM Mercedes R

[straki007]

Hi guys.
I need orig full bdm for Mercedes R 280 CDI 140 kW
OEM numb : A 642 150 66 34
Bosch HW : 0281 014 942
Bosch SW : 1037392244 or 103739844
I suspect the ECU is modified.
The vehicle cannot control the VGT and does not report any fault.
I have a full BDM when the vehicle arrives.

[dantetimoc]

Your file is original, no mods inside of map area!

atached one obd read file. map area is from 190000h to 1FFFFF

[straki007]

Thank you.
So my problem continues.
The RCO of the turbo actuator is 90% after start and drops to 28% per second and the turbo has no pressure. Shit....

[dantetimoc]

Thank you.
So my problem continues.
The RCO of the turbo actuator is 90% after start and drops to 28% per second and the turbo has no pressure. Shit....
As i know is a normal behaviour for this electronic actuator , at startul or only if you put on ignition the actuator will make a full movement... the actuator is good???? this type of actuator is very common problem...

[straki007]

Yes i have new actuator.
28% It is even at full power and the turbo pressure will increase up to 3500 RPM and only to 2000 mb.It's weird that it doesn't report a problem.
When I set the VGTs to close, the turbo has pressure but the car is going very strangely ........... it jerks, and it only goes up to 3000 RPM.

[ASCM]

Make a backup after that make a sw update
To see if its a sw problem

Sent from my SM-J415F using Tapatalk