PDA

View Full Version : SMART 451 0.8 CDI DPF OFF



georgedigital
8th May, 2020, 03:53 PM
Hi guys!
I have a smart 451 0.8 cdi with edc16c32 ecu.I do dpf off and all working good and sometimes the car enters in safe mode.Have someone with same problem find the solution?I attach both files original and mod to check what i did wrong

bobolin4o
8th May, 2020, 04:21 PM
And why you putt here a files with "noread" mark?
Shame on you!!!

About your question "what i did wrong"... your mistake is, that you really don't know what you did, and what you did is to use some shitty program to delete the DPF.
70% of the error codes are out of use, of course the DPF is not eliminated from the program, of course you will have a limp mode...

Regards!

georgedigital
8th May, 2020, 06:56 PM
Sorry m8.
Smart Fortwo 0.8 cdi.Ecu edc16c32 Bosch Nr. 0281017623 Smart Nr. A6609000800 000 Q002 HW.07.09
About your answer I didn't use any program I did it manually.

georgedigital
8th May, 2020, 06:59 PM
When enters in safe mode i have DTC P2011 B2/5 (Hot Film Mass Air Flow Sensor) :Sensitivity Drift

F4STuning
8th May, 2020, 07:08 PM
Hi guys!
I have a smart 451 0.8 cdi with edc16c32 ecu.I do dpf off and all working good and sometimes the car enters in safe mode.Have someone with same problem find the solution?I attach both files original and mod to check what i did wrong
Hello, why you write original and post a remap(bad)?

georgedigital
8th May, 2020, 07:44 PM
Maybe someone knows to check if mod file is correct

georgedigital
8th May, 2020, 07:47 PM
It is original reading by obd

georgedigital
9th May, 2020, 07:49 AM
Thread closed