kess v2 5.017 - 2.47 help

[mrjay88]

i have a kess v2 5.017 - 2.47 i used it for the first time on a 2005 ford transit 2.4 90bhp eec-v ecu and i get constant wake up error i have tried kess 2.23 2.25 and 2.47 i have also created a new sd card using a good brand sandisk ultra 8gb and still wake up error

[a500tut]

Try install Microsoft Visual C ++ Runtime Libraries

[mrjay88]

Try install Microsoft Visual C ++ Runtime Libraries

tried that pal still the same wake up error have i bought a crap tool

[mrjay88]

please some body help me with this error

[oscartomas20]

Hello! Can you put pictures ??

[mrjay88]

yh sure heres what its doing

[dehacko]

other cars doing same problem?
I thing, your problem is comunication this ecu, or bad contact in boot

[smokin66]

have you tried another protocol ?

[mrjay88]

ive only tried to do this transit via obd and i have tried other protocol still wake up error is it possible it might need a rework this is my pcb ignore the sd card it has a genuine sandisk 8gb in now

[dehacko]

red pcb is the best china clone. I have same tool and work fine. try other car and you know where is problem

[mrjay88]

red pcb is the best china clone. I have same tool and work fine. try other car and you know where is problem

i have tried reading my own personal car and it seems to be ok i have a golf gttdi mk5 but i have been asked by a few transit owners for a map and i simply cant read or i.d them because of this wake up error

[oscartomas20]

http://www.mediafire.com/file/hdr2nlmntcxcau9/SE87-D-Kessv2-TF.zip/file

[PelsonBMW]

Try in setup pull up resistor 225ohm