View Full Version : Opel Vectra 2.2 DTI 2003
thunder2
13th May, 2020, 06:21 PM
Hello friends
I need help.
I read with my MPPS a PSG16 ecu from an Opel Vectra 2.2 DTI.
I'm in doubt if the reading is correct.
Someone can help me
Best regards
YougNord
13th May, 2020, 06:51 PM
read its ok
thunder2
13th May, 2020, 08:09 PM
Hi
Reading is complete, there is no lack of maps??
F4STuning
13th May, 2020, 08:25 PM
Hi
Reading is complete, there is no lack of maps??
It ok good reading all you need for tune is present.
thunder2
13th May, 2020, 09:06 PM
Hi friend
I read it with MMPS v18 and I read that it doesn't read everything.
I need to do EGR Off
regards
F4STuning
13th May, 2020, 09:27 PM
Hi friend
I read it with MMPS v18 and I read that it doesn't read everything.
I need to do EGR Off
regards
Here your file friend
thunder2
13th May, 2020, 09:51 PM
Hi
I need to know if it is complete or my file.
It seems that some maps are missing from what I read.
Who has already changed this ecu PGS 16 ?
Regads
F4STuning
13th May, 2020, 09:59 PM
Hi
I need to know if it is complete or my file.
It seems that some maps are missing from what I read.
Who has already changed this ecu PGS 16 ?
RegadsBut do I speak Arabic? You do not trust me? Ok, do as you wish, goodnight.
thunder2
13th May, 2020, 10:13 PM
OK friend
I believe what you say, I just don't want to do damage :)
Tkx and stay safe
SALAS
14th May, 2020, 02:51 PM
Pass PM
Test and report let the tool correct the checksum
thunder2
14th May, 2020, 06:17 PM
Hi friends
When I try to write the file ,the software says it cannot find the ECU
Any idea
Best regards
F4STuning
14th May, 2020, 06:28 PM
Hi friends
When I try to write the file ,the software says it cannot find the ECU
Any idea
Best regards are you speaking about my file mod?
ASCM
14th May, 2020, 07:16 PM
Hi friends
When I try to write the file ,the software says it cannot find the ECU
Any idea
Best regardsDid you tried to write ori file?try to write on bench
Sent from my SM-J415F using Tapatalk
SALAS
14th May, 2020, 07:26 PM
On bench? is a PSG16 fuel pump you need to take it out of the car
SALAS
14th May, 2020, 07:29 PM
Hi friends
When I try to write the file ,the software says it cannot find the ECU
Any idea
Best regards
What method for read did you use?
Do you connect directly on CAN High/CAN Low cables from the pump?
thunder2
14th May, 2020, 07:32 PM
Hi SALAS
Any file :(
With my MPPS V18
Read ok obd
SALAS
14th May, 2020, 07:44 PM
Hi SALAS
Any file :(
With my MPPS V18
Read ok obd
You can't write by OBD is not possible with MPPS you need to strip and join (NO CUT) the Can Low/Can High cables from the pump you can do it with tricore cable
Green cable - Can High
White cable - Can Low
Take a look here:
https://www.digital-kaos.co.uk/forums/showthread.php/619693-conection-MPPS-V18-to-zafira-Y2-2DTR-PSG16
PS: Do not play with this car or you will have a giant piece of scrap metal if you lock the PSG16 you have to change the fuel pump
ASCM
14th May, 2020, 08:41 PM
On bench? is a PSG16 fuel pump you need to take it out of the carOn bench "mode"not removing psg from its place
Sent from my SM-J415F using Tapatalk
thunder2
14th May, 2020, 09:48 PM
Hi friends
Thank you so much for your help.
If I make the connections on the white and green wires (Can h / Can l) do I not need to take the PSG16 out of the car?
If I make these connections it is safe to write the file?
The file I read by OBD is bad or by OBD reads right?
Regards
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.