Log in

View Full Version : Porsche Cayenne Streeing lock


Auto Clinic
24th May, 2020, 07:53 PM
How can I adapt used Streeing lock Cayenne ?
I want tech Kessy and key with used ESL .
It has MCU ST72334.
Which programer can read this MCU ?
ricked
24th May, 2020, 08:10 PM
How can I adapt used Streeing lock Cayenne ?
I want tech Kessy and key with used ESL .
It has MCU ST72334.
Which programer can read this MCU ?

i read that xprog can do it but i never did try also in the xprog list is not the exact same ST number, why not desolder old one and put it on the donor?
Auto Clinic
25th May, 2020, 11:03 AM
i read that xprog can do it but i never did try also in the xprog list is not the exact same ST number, why not desolder old one and put it on the donor?

I checked my ESL and the hardware is ok,when i swap the MCUs so my problem will not solve if the software has problem .
toutougsmserver
25th May, 2020, 01:25 PM
if software problem must use porsche piwis

but in most key i face is hardware problem not software,may be is not the same case as you


regards,
Auto Clinic
25th May, 2020, 02:18 PM
if software problem must use porsche piwis

but in most key i face is hardware problem not software,may be is not the same case as you


regards,

could you do it with Piwis 2?
The ignation can't open so the Piwis can't read Kessy on the car.
trinicolin
25th May, 2020, 06:20 PM
Need front BCM and ELV dump to modify then adapt on vehicle.https://uploads.tapatalk-cdn.com/20200525/89bb4ce544018122b0df9fac7ba50124.jpg

Sent from my SM-G930F using Tapatalk
brend
25th May, 2020, 06:22 PM
And your's clon can do this?.....717313



Need front BCM and ELV dump to modify then adapt on vehicle.https://uploads.tapatalk-cdn.com/20200525/89bb4ce544018122b0df9fac7ba50124.jpg

Sent from my SM-G930F using Tapatalk
trinicolin
25th May, 2020, 06:29 PM
And your's clon can do this?.....717313I can confirm original AVDI, because dump modification is done online calculation.

Sent from my SM-G930F using Tapatalk
Auto Clinic
25th May, 2020, 09:08 PM
Need front BCM and ELV dump to modify then adapt on vehicle.https://uploads.tapatalk-cdn.com/20200525/89bb4ce544018122b0df9fac7ba50124.jpg

Sent from my SM-G930F using Tapatalk

I am taking about cayenne 2009 with Kessy (not BCM).
I have Original AVDI and I am working with it.
trinicolin
25th May, 2020, 10:48 PM
I am taking about cayenne 2009 with Kessy (not BCM).
I have Original AVDI and I am working with it.My bad. Over looked the kessy part.

Sent from my SM-G930F using Tapatalk
Auto Clinic
28th May, 2020, 05:55 AM
i read that xprog can do it but i never did try also in the xprog list is not the exact same ST number, why not desolder old one and put it on the donor?

I tested with the Xprog so I can’t read the MCU 72334 .i am thinking that is lock,
How can you read it via Xprog?
ricked
28th May, 2020, 09:15 AM
I tested with the Xprog so I can’t read the MCU 72334 .i am thinking that is lock,
How can you read it via Xprog?

like i did say i never did try it.... sorry
trinicolin
28th May, 2020, 05:16 PM
I tested with the Xprog so I can’t read the MCU 72334 .i am thinking that is lock,
How can you read it via Xprog?Any luck with original AVDI?

Sent from my SM-G930F using Tapatalk
immoneard
28th May, 2020, 05:19 PM
It is not possible to do this ,Used EVL can not be programed .
Only Brand new with AVDI and Pin.