MED17.5.2 Error ECU does not start

[morcegao]

I have a big problem with MED17.5.2 HW 026S05898 SW 1037510463, Upg. SW 8P0907115BA. 100% reading and 100% writing with my genuine Kess, when I write a MOD car does not start. ECU not identified, ECU recovery mode with original car start file, I just changed the fuel for testing using ECM Titanium and WinOls and the problem continues, write in another car equal to the same ECU and 100% working car start, problem only occurs in my personal car.


Can anyone help?
Not knowing if Kess has the wrong checksum and if it is possible to disable and use it only by the WinOls tuner software

[Prichyndel]

If you have genuine Kess contact Alientech.... :)

[jurebv]

post ori and mod

[morcegao]

post ori and mod

I attached the original file and Test, the Mod are not 100% ready, but I wrote in another car and start perfectly

[jurebv]

write this file, car will start

files look like one is boot read and other is obd

you should know that tune cannot be read by different tool or method and cant be from different car

[morcegao]

write this file, car will start

files look like one is boot read and other is obd

you should know that tune cannot be read by different tool or method and cant be from different car



car not be here this week, coming back I will test


Thank you so much for helping