SRS Mitsubishi Lancer X

[svasiljev]

Help! Clear my dump!
Mitsubishi Lancer X 2007 year. P8635A059 eeprom 24c640.
My crash dump.
Thanks!

[svasiljev]

Is dump myclear wrong error pasenger module.Not clean diagnostic interfase.
For exchange old Lanser X dump: 25c0640_no_crash is OK 20 min, is wrong error is internal eeprom.

[Alex789]

Is dump myclear wrong error pasenger module.Not clean diagnostic interfase.
For exchange old Lanser X dump: 25c0640_no_crash is OK 20 min, is wrong error is internal eeprom.

I have the same problem. After clearing dump crash data went out, but there was 1 fault regarding passenger switch. Wires from switch to airbag are undamaged. Switching on/off has no reaction - fault remains. Any body have such or similar virgin dump? I suppose some bytes still indicate crash or check sum inside. Files are enclosed.

[habs44]

Did you ever figure out your issue with the passenger switch error?

[Alex789]

Still is in progress. I got dump from lancer which was not in accident, but it not helped. It has some additional information. Some people wrote to me that i need to wipe out faults and crash places (0x0C0-0x28F and 0x1070-0x13C7) and that's all. I made many attempts with various combinations, but without success. Upon completion of job will inform.
Enclosed are files with crash and "not fired". They are slightly different, but very useful for analysis.

[Alex789]

Finished.
Problem was a Ultrascan scanner which incorrectly described the error. It wrote that passenger switch circuit was open, but really crash sensor of passenger side absent. Current owner bought this car in such state and previous one said that everything is OK.

[motortech]

hi, same problem have this dump crash Mitsubishi Lancer X, need a clear dump. Thanks eprom 24640

[habs44]

Hi, Thanks Alex!

I'm about to do my first Lancer X module.. I'll let you know how mine turns out...

[hectortaller]

Alex, Have you solved the problemm?. Tell me pls becouse i have one like this too.

[bestof75]

hi guys can u tell me what module numbers u guys have ,because i have 2 good modules here i can load the files if its the same let me know

[Alex789]

Alex, Have you solved the problemm?. Tell me pls becouse i have one like this too.

Of course, solved. You can read about it in this post.

[Alex789]

hi guys can u tell me what module numbers u guys have ,because i have 2 good modules here i can load the files if its the same let me know

Hello. My number was P8635A073 DDPP B A.
You can, simply, upload yours for sharing.