PDA

View Full Version : Corsa D programming



Richard47
28th May, 2020, 04:32 PM
I have a customer with a 2007 Corsa. When I program it with the Zedfull it says “Key programming unsuccessful “

When I use the MVP it says it’s successful but it’s not programmed??

Has anyone come across this problem??

thanks
Rob

Poulpy
28th May, 2020, 05:47 PM
On Corsa D, i use launch crp429

comizelu
28th May, 2020, 06:04 PM
Bad remote..change it


Sent from my MI MAX 3 using Tapatalk

Cromwe11
28th May, 2020, 06:27 PM
Is this just a spare or was it all keys lost?

super jumbe
28th May, 2020, 07:34 PM
Is this just a spare or was it all keys lost?

Doesant matter spare or AKL you only need the pincode, some time I use op-com never let me down, check your remote...

castin
28th May, 2020, 07:40 PM
Try first erase all transponder key, then add org and spare key. Use correct remote type.

Cromwe11
28th May, 2020, 08:17 PM
Doesant matter spare or AKL you only need the pincode, some time I use op-com never let me down, check your remote...

Depends why it’s causing problems. If the BCM has had a hissy fit which Corsa D’s are notorious for then you can have exactly this situation. If there is another key that’s working then it would rule that out.
If the BCM has had a fit then there will be a fault code with wrong environment in the description. If that’s the case then reset bcm/dash and airbag reprogram vin in each then reprogram keys and your done.

Jimmy07
28th May, 2020, 11:55 PM
FVDI good on these seen everything else fail and this cheap tool pulling pin and straight in