Vvdi smart key problem

[artfull]

I generated a smart key for Nissan Juke using vvdi ID46. The remote works, but not the keyless. to start the car you need to bring the key closer to the ignition. when I press the start button, the LED on the smart key flashes. the original key is OK. What am I doing wrong?

[rob h]

Nothing wrong, your programming is correct.
Keyless should work instant.

Have you tested this key, on a different kessy car? Might be a coil that is broken!
Or created a 3th key, and program it to this car.

If this fails, it is a xhorse software problem.
Assuming that you have choosen the correct keytype.

[rob h]

Double post, please remove, thanks Admin

[autoTkey]

How about the battery of the key - is it new and at least 3.2V?

[artfull]

New battery
Only the same situation Peugeot 508 2016 Pilot OK but the car start you need to bring the key to the coil

[autoTkey]

Better ask Samic then. He might know what the problem is.