Log in

View Full Version : ford fiesta 1.4 petrol 2004 sync


swingman26
10th June, 2020, 04:54 PM
Hi,

I have swapped ecu from ford fiesta 1.4 petrol sim 210. Inside eeprom 93c86

dash visteon with eeprom 24c08

I tried with forscan but not work.

With soft from luis andre i can see code sync from ecu but not found solution with dash 24c08. Only with motorola mcu.

someone can sync these files please ?
rafal
10th June, 2020, 05:16 PM
write this to dash............report back

or second file: ecu sync to your ori dash
swingman26
10th June, 2020, 06:45 PM
The 2 solutions not work. I post you the original dump from original ecu.

i think there is a checksum or something.
rafal
10th June, 2020, 06:47 PM
what is wrong with ori file?
swingman26
10th June, 2020, 06:52 PM
Ecu is dead. when i put ori chip on new ecu it s not work
kiszka
10th June, 2020, 09:14 PM
Ecu is dead. when i put ori chip on new ecu it s not work
place the original eeprom from new ecu
swingman26
10th June, 2020, 09:23 PM
place the original eeprom from new ecu
this is dump from original ecu.

when i write new sync file on dash, must relearn keys ?
kiszka
10th June, 2020, 09:35 PM
this is dump from original ecu.

when i write new sync file on dash, must relearn keys ?
save this file
93c86 ecu sim210.bin
swingman26
11th June, 2020, 09:02 AM
SOLVED.

I write file sync to dash.

After that i load 93c86 from ecu to vvdi2 immo by dump. I learn key id to ecu. Key id stored in ecu on this car.

car start. All fine.
kiszka
11th June, 2020, 09:06 AM
SOLVED.

I write file sync to dash.

After that i load 93c86 from ecu to vvdi2 immo by dump. I learn key id to ecu. Key id stored in ecu on this car.

car start. All fine.
it was supposed to be like that, press REP.
andrei1302
3rd February, 2025, 10:58 PM
Hello all !
Please, can someone help with synchronization of Ford Fiesta 2005:
ECU: EDC16C34 (1.4 Tdci) - 95160 Eeprom attached
Dash: 24C08 Eeprom attached

Issue: ECU corrupted and lost Sync bytes. Cannot be done by OBD (neighter with ForScan) because there is only 1 key stored in ECU.
List of DTC also attached in the archive.

Thanks a lot !
kiszka
4th February, 2025, 10:31 AM
Hello all !
Please, can someone help with synchronization of Ford Fiesta 2005:
ECU: EDC16C34 (1.4 Tdci) - 95160 Eeprom attached
Dash: 24C08 Eeprom attached

Issue: ECU corrupted and lost Sync bytes. Cannot be done by OBD (neighter with ForScan) because there is only 1 key stored in ECU.
List of DTC also attached in the archive.

Thanks a lot !
pass is on PM https://mega.nz/file/Fv4UVK7I