PDA

View Full Version : Nissan Tiida 2008 airbag



Alex789
13th January, 2010, 11:06 AM
Hi to all.

I have airbag of Nissan Tiida 2008 with crash.
p/n 98820EM10A (12V) M1
eeprom L56.
Does anybody know where to clear dump or, maybe, have dumps with crash for comparing?

melmar
13th January, 2010, 11:16 AM
Clear to try... please report results... thanks

Alex789
13th January, 2010, 11:21 AM
Clear to try... please report results... thanks

Thanks. I will inform result.

Alex789
15th January, 2010, 12:38 AM
Clear to try... please report results... thanks

Dump is OK. Thanks.

siwaski
17th June, 2010, 10:10 PM
I have the same sensor in my nissan tiida. I will try to fix it by your file.

melmar
17th June, 2010, 10:27 PM
Ok, hope you find it helpful..

welcome to the forum, as your new here, its good
to post a few works in the introduction section..

:proud:

adeltronic
13th December, 2011, 11:44 PM
Thanks, was in need this file!

magnacin
31st May, 2013, 06:45 PM
Thanks. I used your dump to verify a cleared one by myself but wasn't sure if I was ok. I cleared it ok.

cheero
26th July, 2014, 12:26 PM
tested and work OK !

DJairbag
5th April, 2017, 02:42 PM
Hello,

i have same problem i used your file, no failure on DTC but airbag Lamp not go off.
Can someone please help me!?

:( :(

dragon100
5th April, 2017, 02:50 PM
Post here your dump, somebody clear it for you ...

autocargo
27th December, 2019, 04:06 PM
Hello. I've tried few solutions myself for the same airbag module 98820EM10A. I have no failure on DTC but airbag Lamp does not go off... Haven't tried Carprog solution yet.... Maybe someone can tell me if it's good, I don't have vehicle to test... maybe somebody have tested solution... Thanks.

dragon100
28th December, 2019, 08:45 AM
Your cleared file ...