PDA

View Full Version : 308 2011


bezdakou
11th June, 2020, 02:24 AM
URGENT
AFTER CHANGING THE MILEAGE AS ATTACHED FILES, THE CAR DOESN'T WANT TO START ANYMORE
THE DISPLAY INDICATES DRAWS INSTEAD OF THE MILEAGE.

WHEN I RE-READ MEMORY FROM BSI AGAIN I FIND THAT IT HAS CHANGED...

WHERE IS MY FAULT...? ADVISE-ME...

THANKS IN ADVANCE...
jomberykaso
11th June, 2020, 04:46 AM
Your files are good edited. Maybe eeprom was bad soldered or you forgot to plug some connector
bezdakou
11th June, 2020, 02:25 PM
Your files are good edited. Maybe eeprom was bad soldered or you forgot to plug some connector


Thanks for reply..
why the bsi dump file changes after mounting in car?
jomberykaso
11th June, 2020, 02:28 PM
Answered in post #2
bezdakou
11th June, 2020, 02:48 PM
Answered in post #2
i've tried several times...always the same thing...
brend
11th June, 2020, 09:36 PM
Offset 8F0.....>>>>>....FCO all data is missing in both dump (ori and fixed)!
It's mean : no pin,no key,no coding only stay car vin that's it!

Bad first read dump,that's problem!

Bsi now is 99,9% is blank.






URGENT
AFTER CHANGING THE MILEAGE AS ATTACHED FILES, THE CAR DOESN'T WANT TO START ANYMORE
THE DISPLAY INDICATES DRAWS INSTEAD OF THE MILEAGE.

WHEN I RE-READ MEMORY FROM BSI AGAIN I FIND THAT IT HAS CHANGED...

WHERE IS MY FAULT...? ADVISE-ME...

THANKS IN ADVANCE...
jomberykaso
11th June, 2020, 10:26 PM
Offset 8F0.....>>>>>....FCO all data is missing in both dump (ori and fixed)!
It's mean : no pin,no key,no coding only stay car vin that's it!

Bad first read dump,that's problem!

Bsi now is 99,9% is blank.

Yes file has a lot of info in blank, i only checked his mileage edition but now i see data missed from 08E9 to 13F0.

from 1400 to 3FF0 is History reseted