Audi A6 prox key issue

[Fallen]

I have a 2014 Audi A6 with prox key, no slot to insert it.
All the part numbers have worn off the key.

I have renewed an original Audi prox key and the car accepted it.
The remote function works, the prox works when you push the start button but the door touch prox does not work.
When you touch the door handle, the key will flash the LED rapidly but nothing happens top the car.

I believe it may be a problem with the renew process.

Anybody seen this behavior before?

[qeso705]

You have only one key to this car? Chance that pcf renew was not 100% finished and only prox from door not work is quite low. What version number on pcf? With which tool/dump renewed?

[ASCM]

I have a 2014 Audi A6 with prox key, no slot to insert it.
All the part numbers have worn off the key.

I have renewed an original Audi prox key and the car accepted it.
The remote function works, the prox works when you push the start button but the door touch prox does not work.
When you touch the door handle, the key will flash the LED rapidly but nothing happens top the car.

I believe it may be a problem with the renew process.

Anybody seen this behavior before?Which tool u used to programm the smart key?

Sent from my SM-J415F using Tapatalk

[ghitab]

Read original key(by rf) and post.

[Fallen]

You have only one key to this car? Chance that pcf renew was not 100% finished and only prox from door not work is quite low. What version number on pcf? With which tool/dump renewed?

Original key was 7945AC2319
Donor key was renewed by Baracuda.

[Fallen]

Which tool u used to programm the smart key?

Sent from my SM-J415F using Tapatalk

AVDI would precode key ok but not program.
VVDI would precode and program ok.
Once key was precoded by VVDI it could be programmed by AVDI but same result with prox

[Fallen]

Will head back next week and spend more time with the car and renew keys using different methods.
If I can't get a working solution I will post the dump from the original key.

[Fallen]

Solved this today.
Baracuda can't renew 7945AC2319 434mhz correctly.
Used a 9745AC1415 and everything worked as it should.

[immoneard]

Solved this today.
Baracuda can't renew 7945AC2319 434mhz correctly.
Used a 9745AC1415 and everything worked as it should.
Thank you for posting solution , most of the people do not do this .