duzaven
12th June, 2020, 03:29 PM
Water damaged ECU 55568383 KZ.Completely decayed component at the bottom (marked by a lin). as far as I could understand there should be A4t (Switching diodes) I replaced by BAV70W .Otherwise, the board is clean and there is no visible damage.But the car continues to stall at high engine speeds(will not rev past 1500 rpm) and hardly starts.
diagnostics show error P0089 ,P0093.I also replaced full rail pressure sensor and flow pressure control valve .
I checked the connection from the ECU connector to components in pcb (4.36 control valve) ( 6,8,38 pressure sensor )
Please help deal with this diver.
diagnostics show error P0089 ,P0093.I also replaced full rail pressure sensor and flow pressure control valve .
I checked the connection from the ECU connector to components in pcb (4.36 control valve) ( 6,8,38 pressure sensor )
Please help deal with this diver.