PDA

View Full Version : 206CC pin from IAW 48P2.38



rob h
15th June, 2020, 09:33 PM
206CC 2001
IAW 48P2.38 Ecu
29F400BC


Hello guys,
I read the 29F400BC, and can not find the pin.
Tested some other dumps, and compared these with mine.

Still not able to discover any pin, should be there 12 places.
723022
I read the 29F400BC a few times,


723005

Greeting Robbert

Oktawian
15th June, 2020, 09:56 PM
I found this ...

UAHPHUV17B
UAHPHUV17B
JTITDS
U2143658
4BRB

ITDS


For start try : UAHP, HPUA, HPHU, HUHP, HUV1, V1HU and so on...

Regards

rob h
15th June, 2020, 10:23 PM
I dont think, that these are correct.
Atleast, not if i compare my dump, to others with confirmed pin.

How many can i try, wrong pin will lock

Oktawian
16th June, 2020, 06:32 AM
Don't know how many times you can put wrong pin.
To not waste the time try to read bsi...

But you can try v17b or 7bv1 it's looking likę typical pin code.

Zmann
16th June, 2020, 12:51 PM
The data line seen as PIN look alike is hw S/N, check it on the label.

No PIN or corrupted.

rob h
16th June, 2020, 09:19 PM
TL866 , give me a fair reading, i read it a few times, same reading over and over.
Will solder it back, and put it in the car, see if it still runs.


Then pull the bsi.

lion0304
16th June, 2020, 11:56 PM
TL866 , give me a fair reading, i read it a few times, same reading over and over.
Will solder it back, and put it in the car, see if it still runs.


Then pull the bsi.

I use all the time TL866 for flash 29Fxxx. Never met any problem.