Berlingo mileage

[zubereq]

Hi
I need mileage correction. I read hc08 from dash. Maybe someone has BSI NEC diagram connection for UPA?
I need set mileage 223000km.

[cascais]

Hi
I need mileage correction. I read hc08 from dash. Maybe someone has BSI NEC diagram connection for UPA?
I need set mileage 223000km.

Did you already put 0 km on bsi?

[cascais]

Hi
I need mileage correction. I read hc08 from dash. Maybe someone has BSI NEC diagram connection for UPA?
I need set mileage 223000km.



your file is not good

year of the car please and manufacter of the dash

[zubereq]

I read it by UPA as hc08az60 mask 1J35D. Berlingo is from 2001 2.0HDI. Dashboard is magneti marelli.

[cascais]

im gonna try no promisses



here

[jomberykaso]

Hi
I need mileage correction. I read hc08 from dash. Maybe someone has BSI NEC diagram connection for UPA?
I need set mileage 223000km.

Your file has 218466 kms.

[zubereq]

Jomberykaso you post original mileage on odometer before BSI change. After I changed cloned BSI I saw 999999km on dash. Now I try to read BSI with UPA. If I post dump will you help?

[stoyanov]

If I post dump will you help?

Post your bsi dump here and you will get help for sure.

[zubereq]

I have problem with read NEC. I use original UPA with NEC adapter. I solder 14 wires and get "NEC/MOT switch pin error". I have no idea what's wrong.

[stoyanov]

Never had problem with UPA to read this mcu,check again all connections.

[zubereq]

I have 75076303 read as 780949. Could you share your connection diagram for UPA? I try without resistor also but get the same error. Pin 17 lifted. I check connection twice and all ok but when I start read I get nec/mot switch pin error.

[zubereq]

Please help. I have no idea what's wrong with this car. Original Bsi is 9639087380 with NEC 75076303. I bought 9642409880 with the same NEC inside. I try on several BSI 9642409880. I write dash with file from jomberykaso and set ori file BSI to 0km put everything to car turn ignition on and I see 858253km. One time I used BSI from other car without programming NEC and I saw 313000km on dash. I think it is problem with NEC file. Could someone share working virgin file? Or maybe easier way is other Bsi set to 0 and make immo off?

[zubereq]

I forget add dump.

[jomberykaso]

post BIN file, you posted EEF file

[BusCan]

Hi
I have BSI 999999km corupted
Possible 0Kms
My Km 280 000Kms
Thanks

[rafal]

file bad readed.....................

[BusCan]

file bad readed.....................

Yes :(
Her correcte file
Thanks

[rafal]

try this one......................

[BusCan]

try this one......................

Thanks Rafal work 100%

[irmasgarage]

Hello I need help i have citroen Berlingo whit BSI from another car and mile is changed from 216230 to the 279259 so i need to change it i can read eeprom and flash with autel which file you need to help me?? Please if you can help me fast

[marina_rv]

Hello I need help i have citroen Berlingo whit BSI from another car and mile is changed from 216230 to the 279259 so i need to change it i can read eeprom and flash with autel which file you need to help me??

1. read --->>> https://www.digital-kaos.co.uk/forums/announcement.php?f=174&a=32 <<<--- read and send full info
2. distance in dash + BSI - 1000 %
3. read dash + BSI and send to forum.