Edc17c60 pcmflash problem

[kiriki6969]

Hello everyone . I have a problem with this edc17c60 psa. written with pcmflash 1.9 and car started for several times. After this the car won't start anymore .... Anyone who can patch this file ... Thanks in advance

[Babos]

I can to patch.

[kiriki6969]

I am interested in your help .. Send me a pm

[moky]

bizarre your file seems to be already patched...i did one last week (ktmbench) and bits are ok on your file..perhaps need other method.

[jurebv]

try 1F0B2 to 0 (in 16bit)

[proel]

bizarre your file seems to be already patched...i did one last week (ktmbench) and bits are ok on your file..perhaps need other method.

need to buy genuine tool.

[kiriki6969]

Problem solved.Thank you all. The problem was not the file. immobilizer blocked ecu. I inserted the pin into the motor ecu and the system rebooted. car started and running.thanks everyone for the help.

[waldigsi]

This ecu has chip protection, after uploading the modified file it damages the eeprom (immo data)
after modification you need to prepare the file, ori flashers do it automatically
I had the same problem and had to edit the file manually

[Fabiuz]

try 1F0B2 to 0 (in 16bit)

I am more interisting of this byte.
I have try with Pcmflasher 1.20 first and whit newtradata after.
Newtrasdata required load ori file to calc chk and car start normally more and more time.
In all 2 file pcm and newtrasdata i have adress 1F0B2 set to 3C.....why whit newtrasdata untouch this adress??

[ivanmihov]

This ecu has chip protection, after uploading the modified file it damages the eeprom (immo data)
after modification you need to prepare the file, ori flashers do it automatically
I had the same problem and had to edit the file manually

are we talking about OBD read here,never done PSA EDC17C60 before,is everything OK if it is done bdm with ktag

[figani]

are we talking about OBD read here,never done PSA EDC17C60 before,is everything OK if it is done bdm with ktag


yes, bdm...boot... bench mode... service mode...
as ever...

pcmflash 1.2 had a bug in SW...
chinese cloned 1.2 SW, and now this bug is all over the world...
as they can´t clone 1.21 (where the bug is solved), the bug will live for ever...

all other ori tools/sw has also solved this bug...

[carmageddon]

also the previous version of pcm flash clone (1.1.99) have this problem with edc17c60, not only 1.2.

[figani]

also the previous version of pcm flash clone (1.1.99) have this problem with edc17c60, not only 1.2.

Yes, all versions before which was able to read/write C60...
They solve it with 121...