RNS510 Skoda Columbus

[kankosek]

Hello friends.

I have a problem decoding the RNS510 navigation to skoda. I'm using RNS510 Code Finder v2.0 and v2.1 - no result. I use COM on USB for this. Exactly the FTDI232 interface.

The program stops with the message "next code: 0"

Anyone know a way to decode this navigation?

[lucas39]

Check the radio power supply.
Check the cable connection to the radio.

It must work.
If not, it's another cable and another program.
Can you upload a file to the radio?

[mbi]

I use COM on USB for this. Exactly the FTDI232 interface.

On FTDI chip you have 0-5V on RX and TX which is TTL, no pure rs232.

Use phisical rs232 COM port, with no voltage converter (like max232 or similar).


Read first post here: https://www.digital-kaos.co.uk/forums/showthread.php/577285-RNS510-code-finder-app

This app works with Skoda Columbus, tested

[kankosek]

Approx. I used the JCOM1 port on the MSI motherboard. The program is already running and information in Putty is visible.

The problem is that it doesn't detect the code. It shows the codes to the very end and stops at the number 1998.

[kankosek]

I checked on windows10 MSI motherboard and dell optiplex (windows 7). There is the same problem. I bought the code on eBay, according to the Skoda database it is 0948, but it does not work. Is there a firmware problem?