Log in

View Full Version : SantaFe 95910-2w380 ver 1.2 crash problem


AcademicFa
22nd June, 2020, 01:06 PM
Cleared the crash, but error 1620 remains. Help me please.
jokir
22nd June, 2020, 02:25 PM
Test and report
AcademicFa
22nd June, 2020, 06:19 PM
Programmed - no result. The error remained.
superjet
23rd June, 2020, 01:48 AM
Cleared the crash, but error 1620 remains. Help me please.
Tset and report...
pass pm.
AcademicFa
23rd June, 2020, 07:59 AM
Thanks for the help, but the problem remains. iProg+: DTC ERASE ERROR OR ECU INTERNAL FAILURE. 1620 Internal fault - replace the unit SRSCM
superjet
23rd June, 2020, 10:04 AM
Thanks for the help, but the problem remains. iProg+: DTC ERASE ERROR OR ECU INTERNAL FAILURE. 1620 Internal fault - replace the unit SRSCM
Check this and report......
AcademicFa
23rd June, 2020, 11:16 AM
Sorry but not working
Abdo Abdelatif
23rd June, 2020, 11:48 AM
Santa Fe 95910-2w380 IS cleared
AcademicFa
23rd June, 2020, 12:44 PM
Password, please
Abdo Abdelatif
23rd June, 2020, 01:13 PM
Désolé ok pass via pm
AcademicFa
23rd June, 2020, 02:58 PM
Not work
724985
superjet
24th June, 2020, 03:57 AM
Not work
724985
did you test in car or on bench?
AcademicFa
24th June, 2020, 03:01 PM
Both on the table and on the car - one and the same error.
725312.
superjet
25th June, 2020, 02:48 AM
write and donot test on bench,frist test in car.
AcademicFa
25th June, 2020, 04:19 PM
The firmware provided by You does not change either when I immediately put it on the machine, or when I erase errors by the programmer.