nissan xtrail 2.0dci dtcs remove

[tiugrikas]

hi mates need remove MAF dtcs p0100 and p0110 . nissan xtrail 2008t 2.0dci 150cv edc16cp33. cause car is impossible to drive when maf is connected it has lot of smoke and even shuts down after pushing revs . maf is brand new and also many things checked so customer agreed with this solution cause I gave up looking real reason . MAF disconected car drives almost normaly

[ecuprogramer]

hi help you for ori good dtc eror code off...

reputation and thnx button press for help

[tiugrikas]

hello everyone maybe someone could remove same faults from same car but bdm flash cause earlier obd read was bad and had many problems but now everything is ok do please remove same faults from bdm file .thank you

[ecuprogramer]

hi what problem 1 solution???
download 2 solution

reputation and thnx button for help :applause:

[tiugrikas]

Hi this solution also not good cause if maf disconected car do not start or if you disconect maf on working engine its shuts down imedetially any has dtc off good solution?

Išsiųsta naudojantis LM-Q610.FG Tapatalk 4 Lt

[Babos]

write me i try to help.

[ecuprogramer]

dtc off good solution, what's the problem ??? make a chk when you type in the car and the car started ok. what tools do you use. you asked for 2 dtc error code off i did it well for you. it's not my fault

[tiugrikas]

I am not telling its your fault . problem is car cause ir has many symptoms .I use ktag at the moment .chks made by winols

Išsiųsta naudojantis LM-Q610.FG Tapatalk 4 Lt

[ecuprogramer]

dtc error code off solution good and tested,works well, clean maf sensor with contact cleaner and will work well .....

[tiugrikas]

Cleaning did not helped so I bought brand new one original but it did not helped

Išsiųsta naudojantis LM-Q610.FG Tapatalk 4 Lt

[jurebv]

try this , with and without maf plugged in

Best Regards

[tiugrikas]

No car do not start neither maf plug on neither plug off

Išsiųsta naudojantis LM-Q610.FG Tapatalk 4 Lt

[jurebv]

here , no password, try it , if problems then try just copy map at 1B2B18 from my file