Audi Q7 3.0 TDI P0607 need help

[evisdaci]

Hello everyone,

I have a Audi Q7 3.0 TDI 2009. Somebody have done before me DPF off and the car has work for some month. Now i have a error code :

P0607-Control Unit Performance

Car crank but not start. If I clear the error car start and everything is OK, but when I turn off again the car it will not start again. So if i clear again this error car start again but not start if i turn off. So any help for this problem please.

I think the problem is in software, so any help please. The ECU is :

Bosch EDC17CP04

4L1 910 401 N
SW: 1037518084

[chrisimerk]

Hello everyone,

I have a Audi Q7 3.0 TDI 2009. Somebody have done before me DPF off and the car has work for some month. Now i have a error code :

P0607-Control Unit Performance

Car crank but not start. If I clear the error car start and everything is OK, but when I turn off again the car it will not start again. So if i clear again this error car start again but not start if i turn off. So any help for this problem please.

I think the problem is in software, so any help please. The ECU is :

Bosch EDC17CP04

4L1 910 401 N
SW: 1037518084

here you go test and report

pass in pm

[evisdaci]

Doesn't work mate. Now no error code but car not starting. Engine crank but no start. No error code. Any other solution please.

[evisdaci]

Any help please

[jurebv]

Write this

if still doesn't work then your ecu hardware is damaged

Best Regards

[evisdaci]

Tomorow I will try and let me know. But today I have done some testing with some diferent dump file, and finally I think the problem is in eeprom dump. I have download another BDM dump file from another guy and write in my ECU only eeprom and no more P0607 and car start and turned off again because "incorrect key", because is immobiliser active and car cant start normally. So car start every trying and turned off again (turned off from IMMO), so I think the problem is in eeprom dump.