Iveco 2.3 0281012193

[badyl00]

Hello. I have problem with Iveco ECU. Car starts with EDC lit and 1D2 error after diag. Can someone check dumps for error ? Maybe corrupted flash. I read with xprog. I buyed used ecu from scrap and program with this files (from old) but car does not start and immo light lid (no verify errors).

[greyg]

Checksum error.

[badyl00]

Checksum error.

Can you help somehow ?. There was problem in eeprom im used ECU. After rewrite with another programmer car starts but same error 1D2.

[badyl00]

Here is readings from old and new.

[vladanr]

726036 here you are

[greyg]

Old with checksums. If it doesn't work, you have to reset the flash.

[badyl00]

@vladanr car starts with immo light on. Same error 1D2. @greyg car starts, same error 1D2. How to reset flash ?

[greyg]

It's a risky operation. You could permanently damage HW. Write on PM.

[badyl00]

Problem solved. There was a problem in eeprom chksum. Car starts no errors.