Witch Software to read write Renault Laguna 2

[gillekille]

Hi !

Ive installed K-suite but i cant find my Laguna 2 2.0T 163hp F4rt with Sagem 2000 system. Does anyone know witch software i should use to read and write software for the car ?

[gillekille]

To answer myself: You can use K-suite with the Ktag hardware and you need to open ECU.

[ZiZiTun]

i dont know about tool which read it via OBD, but if you have programmer, it is no problem. In this ecu you have 29F800BB PSOP44 flash.

[gillekille]

Ok, but you need to resolder and put a socket in then ? I think ive found the Pinout for this ECU but im new at this so im not quite sure. In the picture you have the connection in the ECU, then you need some connections outside the box to.


726564

[ZiZiTun]

yes, but ktag doesn´t support this ECU. With NEW TRASDATA from Dimsport you can read/write this ECU
726633

[gillekille]

Thank you, that picture describe it very well !
But in my K-suite software the Sagem 2000rpm is in the list for the K-tag ?!
Ive ordered a K-tag. Can i use Dimsports software for the K-tag then ?

[ZiZiTun]

No, Dimsport softwer you can use only for NEW GENIUS and NEW TRASDATA. No clone available. Slave version cca. 3000eur ;)

[gillekille]

Wow !
Yes, that is alot of money for some hometuning :)
I have a Kess V2 reworked, but ive ordered the K-tag now just to test it on my "Test car" here at home. So i hope i can read it with the K-tag. Just like this post:
http://blog.obdii365.com/2016/05/02/renault-sagem-s2000rpm-pinout-to-ktag/

[jurebv]

wrong topic sorry

[gillekille]

Ok, can you explain ? what is wrong with it ?