View Full Version : Ford Galaxy dcm 3.5 bad dpf chk ?
lucim12
4th July, 2020, 08:33 PM
Hey
I have a Ford galaxy 2012 2.0 163hp for dpf egr off
I bought a dpf egr off file but car baerly runs and shuts off, with original is ok , maybe checksum is incorrect? i use kess
i post files here
Thanks!
jurebv
4th July, 2020, 09:16 PM
Best Regards
TSC2010
4th July, 2020, 09:16 PM
contact tuner who you buyed this files...he should fix it
lucim12
5th July, 2020, 09:14 AM
hey jurebv thanks for help but car hast egt dtc sensor p042A P2032
can yuou please remove thanks
jurebv
5th July, 2020, 09:21 AM
you should have mentioned you removed all sensors, here added 2 dtcoff, same pass
lucim12
5th July, 2020, 10:03 AM
I flashed the last file but naow car doesnt start not cranking
i flashed the original file same thing
engine malfunction is displayed on dash, do dtc in engine apart from egt sensors
any idea what could have happend?
thanks
jurebv
5th July, 2020, 10:17 AM
you have some issues with the car, check fuses or ecu. or your tool doesn't write properly. flashing ori back confirms it
lucim12
5th July, 2020, 10:25 AM
it does comunicate with the ecu, fuses are ok, i writen with kess 5 times now with no plroblem
maybe it lost some coding?
lucim12
5th July, 2020, 11:16 AM
after wating 30min with key in ignition car started fine with original file
there where some antitheft erros in instrument control module whitch were erased without problem
but now after reflashing the last mod file doest start
i wait another 30 min maybe its the antitheft issue
if car doesnt start maybe bad checksum ?
i now have 6 errors p244D egt sensor
jurebv
5th July, 2020, 11:33 AM
also added p244d :D
try waiting before writing as before and (or removing battery for a while), as i told you before car has some issues
lucim12
5th July, 2020, 12:18 PM
i waited 30+ mins for last file but didnt start, i disconected the battery for some minutes but did not help..
lucim12
5th July, 2020, 03:44 PM
only after i flash orginial file wait 1 hour then car starts..then everything is ok
i will try to read by bdm jtag with ktag
anyone knows if ktag reads this ecu?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.