IO Terminal technical support

[jodge]

I'm just a user!
Maybe it will help to others if you sharing your experiences too

Not necceseary it will working with your stuff the similar ways (unfortunately)

- Fiat Bosch EDC15C7 0281010488 flash/eep r/w great in normal mode. In the car working key with working immo is mandatory!

- Siemens SID 801 5WS40035A-T working on the bench. Before you reading the eep you must read the flash first unless the eep is only FF
- Siemens Simos 3PA, 3PE..etc all working great in the car
- EDC15C2 suzuki/PSA all great in the car

Alfa / Fiat Marelli BSI both mask (912DG128/9S12DG256) all ok in the car the estimated wait time before the acces is around 8-10 min
Fiat Delphi BSI 93c86 external eeprom all ok in the car
Fiat Marelli BSI 96c160 failed both in the car and on the bench
Fiat Marelli BSI 96c320 failed both in the car and on the bench
Fiat Marelli BSI 96c640 failed both in the car and on the bench
Fiat Delphi BSI with 70F3556 failed in the car

i'll continue :)

[TERMINATOR1000]

I'm just a user!

Fiat Marelli BSI 96c160 failed both in the car and on the bench
Fiat Marelli BSI 96c320 failed both in the car and on the bench
Fiat Marelli BSI 96c640 failed both in the car and on the bench
Fiat Delphi BSI with 70F3556 failed in the car

i'll continue :)

without 120 Homs resistor ?
Work fine for all BSI Marelli with OBD2 connector integrated FOR ME ( bench or not ) without 120 Homs resistor
After for new BSI Marelli , not work ( black or withe one ) with or without 120 Homs resistor

For conclude NEVER BOUGHT FIAT BSI 1 Licence it's an scam

[jodge]

i've made a similar connector (https://cdn.thingiverse.com/renders/32/fe/b6/97/02/13cded61c6fa98bce729ce2f07f8f0e4_preview_featured. JPG) with 120ohm and ofc. removed the resistor from the main pcb
so yeah tested both