PDA

View Full Version : a3 8p 2009 8p0 920 902 micronas



yokazik
16th July, 2020, 05:49 PM
Hi i'm looking for flash from dash 8p0920902
Dash is dead after costumer try to read immo data to add new key.
in attach is corrupted file

yokazik
21st July, 2020, 08:43 AM
bump.
I can pay for good file.

yokazik
21st July, 2020, 09:23 AM
"pinotec" please clear inbox

pinotec
21st July, 2020, 09:28 AM
try this file.. pass pm

yokazik
21st July, 2020, 11:07 AM
not working dash is still dead
i'm looking so sgo file 8p0920902

yokazik
23rd July, 2020, 11:54 AM
i've found solution after many test. Problem is in micronas CRC. If some one need help ask me pm .

Regards and thanks for try to help.

sepe82
30th October, 2020, 10:41 AM
hello i have lost the key -I tried to read micronas cdc3217g but bypass sicurity error -xprog 6.12 -can you help me?757089757090red -vcc5v
black-gnd green-test blue-reset white-tms grey-tdo orange-tkc yellow-tdi

yokazik
30th October, 2020, 11:07 AM
Did u remove resistor?

Wysłane z mojego SM-G973U przy użyciu Tapatalka

sepe82
30th October, 2020, 11:47 AM
I have gone over the welds now it is connected how can I create the new key?

herbertrerh
2nd May, 2021, 05:07 AM
I have a cluster dead, can you help me to correct the file

marina_rv
2nd May, 2021, 10:09 AM
I have a cluster dead, can you help me to correct the file

help my, help my - 6 year = 6 post.

no help other topic = bad !!!

tigar
2nd May, 2021, 10:42 AM
Hi test it
b.r

herbertrerh
3rd May, 2021, 04:54 PM
Hi test it
b.r

Hi, thanks for your help, I test this flash dump but the cluster is deat too.
I am work with xprog and write and verify good, but the cluster installed in car and is dead, donīt have comunication.

tigar
3rd May, 2021, 05:16 PM
Hi this flash workin dash.