Alfa Romeo GT 1.9 JTDm 150HP EGR OFF goof

[user202]

Hi guys,

I will make my first touch soon with ALFA ROMEO GT with Bosch EDC16C39 1.9 JTD 150HP (2005)

I should make EGR off I made a sample file from ORI database, I did EGR closed by 4 hyst maps.
Is it enough to do with or need to remove P400 class Fault codes?

Or should I use EGR Governor switch to disable it?

By the the way I would use BDM fully read and write with KTAG because as I know Alfa EDC16 takes 40min to read by OBD.
Does anybody has an experience to write OBD Alfa with KESS, I have Kess EU made quality purple pcb :)


Thanks!

[Fronzies]

I checked your file the egr and the dtc are ok. You did a good job

[user202]

I checked your file the egr and the dtc are ok. You did a good job

Thanks, regarding the fault codes I haven't removed them yet. :)

[antwnhszr]

Hi guys,

I will make my first touch soon with ALFA ROMEO GT with Bosch EDC16C39 1.9 JTD 150HP (2005)

I should make EGR off I made a sample file from ORI database, I did EGR closed by 4 hyst maps.
Is it enough to do with or need to remove P400 class Fault codes?

Or should I use EGR Governor switch to disable it?

By the the way I would use BDM fully read and write with KTAG because as I know Alfa EDC16 takes 40min to read by OBD.
Does anybody has an experience to write OBD Alfa with KESS, I have Kess EU made quality purple pcb :)


Thanks!

hi.if you want deactivation EGR , put this file on your ecu and you are ok.

[user202]

Your solution is the same as I compare. Thanks.
By the way is it easy to remove the ecu from the car and do it by bdm as I know the OBD will takes 40 mins to read the ECU.

Thanks ;)