karolp1993
21st July, 2020, 07:48 PM
Hi,
I have 307 2007 with 1.6 hdi 110hp and EDC16C34. The car have replaced BSI. ECU and keys because of BSI damage. It is 9HY version, without FAP and claps, so it was hard to find exactly the same ECU.
Now, the car is working with EDC16C34 from 9HX (90hp version) and have few errors about fuel and boost.
I have original ECU from this car and want to install it with changed BSI. So, first idea, immo off and everything should work.
I made full backup with KTAG, edited eeprom file (8kb dump), and wrote to ECU. Engine started but P0603 appear and rpm don't exceed 3000rpm.
Coding injectors, coding the parameters by PP2000 doesn't make any effect.
Can someone check my file with immo off? I also attach ori dump.
EDC16C34
9658944580
Regards
I have 307 2007 with 1.6 hdi 110hp and EDC16C34. The car have replaced BSI. ECU and keys because of BSI damage. It is 9HY version, without FAP and claps, so it was hard to find exactly the same ECU.
Now, the car is working with EDC16C34 from 9HX (90hp version) and have few errors about fuel and boost.
I have original ECU from this car and want to install it with changed BSI. So, first idea, immo off and everything should work.
I made full backup with KTAG, edited eeprom file (8kb dump), and wrote to ECU. Engine started but P0603 appear and rpm don't exceed 3000rpm.
Coding injectors, coding the parameters by PP2000 doesn't make any effect.
Can someone check my file with immo off? I also attach ori dump.
EDC16C34
9658944580
Regards