Need help pre tenensioner

[MartinAGR1]

Hi, need help with pretensiones of Nissan Rogue 2013 after clear crash data and change steering wheel and dashboard airbag, I only have 4 dtc about front pretensiones 2 dtc of both side, I put a 2.2 ohm resistor and clear dtcs but allways have one dtc per side


before resistor for the right side:
B1081 PRE-TEN FRONT RH (Open)(Present and History)
B1177 PRE-TEN2 FRONT RH (Open)(Present and History)


after resistor and clear dtc's
B1177 PRE-TEN2 FRONT RH (Open)(Present and History)


B1177 never clear, nissan rogue has the pretensioner in seatbelt and only have one plug of two wires

I dont know if resistor is ok or need another value, If somebody knows that are a second pretensioner please let me know.

Thanks in advance

[rizki]

possible cause
• Disconnection of wiring harness and
open.
• Internal breakdown in front RH seat
belt pre-tensioner 2.
• Internal breakdown in diagnosis sen-
sor unit (ACU).

[slick_dick]

check to see if has bent pins on airbag ecu

[MartinAGR1]

Thank you but the pretensioner doesnt work by that reason I put resistor for the srs unit recognize that are working


possible cause
• Disconnection of wiring harness and
open.
• Internal breakdown in front RH seat
belt pre-tensioner 2.
• Internal breakdown in diagnosis sen-
sor unit (ACU).

[MartinAGR1]

I will check it thank you


check to see if has bent pins on airbag ecu

[alex2019]

I will check it thank you

b1177 refer to seatbelt buckle, did you checked it?

[arpi]

check if you have igniter on the anchor side of the seatbelt ....by the floor, buckle doesn't deploy ,it's fixed